Invacare 9153637775 Owners Manual - Page 41

7 Seat and Back ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely otherwise injury or damage may occur. 7.1 Replacing Back Upholstery 1. Remove the eight mounting screws and washers that secure the existing back upholstery to the back canes. 2. Remove existing back upholstery from the back canes. 3. Securely tighten the new back upholstery to the back canes with the phillips screws and washers. 7.2 Replacing Seat Upholstery 1. Remove the eight phillips screws and washers that secure the existing seat upholstery to the crossbraces. 2. Remove the existing seat upholstery from the crossbraces. 3. Ensure positioning of seat positioning strap (if used). Refer to Installing the Seat Positioning Strap on page 62. 4. Install new seat upholstery by reversing STEPS 1-2. Washers 7 SEAT AND BACK Back Upholstery Mounting Screws Washers FIGURE 1 Replacing Back Upholstery Mounting Screw 16-inch Seat Depth Seat Upholstery Wheelchair Frame Part No 1110546 FIGURE 2 Replacing Seat Upholstery 41 Invacare® Tracer™ EX2 Wheelchair