Invacare 9153637778 Owners Manual - Page 55
ANTI-TIPPERS/WHEEL LOCKS, Part No. 1110550, Invacare, Tracer, SX5 Wheelchair
View all Invacare 9153637778 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
10 ANTI-TIPPERS/WHEEL LOCKS Installing Anti-Tippers To ensure the correct model anti-tipper is used refer to chart below. Measurements for anti-tippers are approximate and are taken with extension tube in bottom hole position. MODEL SEAT-TO-FLOOR HEIGHT ANTI-TIPPER (MEASUREMENTS IN INCHES) LENGTH HEIGHT MODEL PART NO. Anti-Tipper Height Bottom Position SX5 SX5 RECLINER 17 1/2 to 19 1/2 inches 151/2 to 171/2 inches 171/2 to 191/2 inches 131/2 115/8 131/2 31/2 1360 1058836 23/4 1360A 1058752 31/2 N/A 1088242 Anti-Tipper Length Flat Surface 1. Press the release buttons and insert the anti-tippers with the anti-tipper wheels pointing toward the ground/floor into the wheelchair frame tubing. 2. Ensure that the release button of the anti-tipper fully protrudes out of the hole in the bottom of the wheelchair frame tubing. 3. Place the wheelchair on a flat surface. 4. Measure the distance between the bottom of the anti-tipper wheels and the ground/floor. Anti-Tipper Wheels Anti-Rattle Anti-Tipper Release Buttons Rear Frame Tubing FIGURE 1 Installing Anti-Tippers A 11/2 to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all times. 5. If the distance between the bottom of anti-tipper wheels and the ground/floor is not 11/2 to 2 inches, adjust anti-tippers. Refer to Adjusting the Anti-Tippers on page 56. Part No. 1110550 55 Invacare® Tracer® SX5 Wheelchair