Invacare 9153637779 Owners Manual - Page 70
Removing and Installing Fixed Height Armrest, Removing Armrest, Installing Armrest,
View all Invacare 9153637779 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
12 RECLINER 12.5 Removing and Installing Fixed Height Armrest ƽ WARNING Make sure the armrest is securely locked before using the wheelchair. Removing Armrest 1. Push down on armrest to ensure it is fully seated in front and rear sockets. This step is needed to prevent the release buttons from hanging up on the sockets. 2. Unlock the rear armrest by rotating the armrest release lever towards the outside of the wheelchair. 3. Press IN the armrest release buttons at the front of the armrest. 4. While pressing in the armrest release button, remove the armrest from the arm sockets by pulling straight up. Installing Armrest Rear armrest release lever MUST be in the unlocked position when installing the armrest. Armrest Release Lever Arm Socket Armrest Armrest Release Button Arm Socket 1. Position the armrest just above the front and rear arm sockets. 2. Push arm down evenly at the front and rear until the front armrest release button snaps into the front arm socket. FIGURE 5 Removing and Installing Fixed Height Armrest 3. Lock rear armrest by turning the armrest release lever towards the back of the wheelchair. 4. Ensure armrest is locked securely in the arm sockets by gently lifting up. If not locked, repeat STEPS 1-3. Invacare® Tracer® SX5 Wheelchair 70 Part No. 1110550