Invacare 9153637780 Owners Manual - Page 60
Seat to floor
View all Invacare 9153637780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
11 SEAT TO FLOOR 11 Seat to floor ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. 11.1 Changing Seat-to-Floor Height For this procedure, refer to FIGURE 1 on page 62 and FIGURE 2 on page 63. ƽ WARNING The seat depth, size/position of the front casters, size/position of the rear wheels, use of an anti-tipper model, as well as the user condition directly relate to the stability of the wheelchair. Any change to one or any combination of the seven may cause the wheelchair to decrease in stability. These adjustments MUST be performed by a qualified technician. Seat-to-floor heights have specific positions depending on rear wheel size, rear wheel position, front caster size and front caster position. These adjustments MUST be performed by a qualified technician. If changing the seat-to-floor height the correct anti-tippers MUST be ordered to maintain a 11/2 to 2 inch ground clearance. 1. Refer to one of the following charts to determine mounting positions for front casters/forks and rear wheels for the desired obtainable seat-to-floor height: A. Adult/Hemi Frame Style - FIGURE 1 on page 62. B. Recliner Frame Style - FIGURE 2 on page 63. 2. Remove the rear wheels from the wheelchair. Refer to one of the following procedures: A. Adult/Hemi Frame Style - Refer to Removing/Installing Rear Wheels on page 49. B. Recliner Frame Style - Refer to Removing/Installing the Rear Wheels on page 71. Invacare® Tracer® SX5 Wheelchair 60 Part No. 1110550