Invacare 9153637785 Owners Manual - Page 61

11 SEAT TO FLOOR 3. If necessary, replace the front casters and forks with the casters and forks indicated in the chart. Refer to replacing front casters and installing/replacing fork assemblies in section 7 of this manual. 4. Reinstall the rear wheels onto the wheelchair in the mounting position indicated in the chart. Refer to one of the following procedures. A. Adult/Hemi Frame Style - Refer to Removing/Installing Rear Wheels on page 49. B. Recliner Frame Style - Refer to Removing/Installing the Rear Wheels on page 71. 5. Adjust anti-tippers according to new seat-to-floor height. Refer to adjusting the anti-tippers in section 8 of this manual. Non-Recliner Frame Style ƽ WARNING 20-22 Wide (300 lb. weight limitation) Wheelchairs only: 8 x 13/4 inch semi-pneumatic front casters MUST be installed. DO NOT replace with any other size/style front caster. Otherwise, injury or damage may occur. 6-INCH FRONT CASTERS SEAT-TO-FLOOR FRONT CASTER REAR HEIGHT MOUNTING WHEEL (IN INCHES) POSITION SIZE REAR WHEEL MOUNTING POSITION 15 1/2 16 1/2 17 1/2 17 1/2 TOP MIDDLE BOTTOM BOTTOM 20 inch 22 inch 24 inch 20 inch TOP TOP TOP BOTTOM SEAT-TO-FLOOR HEIGHT (IN INCHES) 17 1/2 17 1/2 18 1/2 19 1/2 8-INCH FRONT CASTERS FRONT CASTER MOUNTING POSITION REAR WHEEL SIZE TOP 20 inch TOP 24 inch MIDDLE 22 inch BOTTOM 24 inch REAR WHEEL MOUNTING POSITION BOTTOM TOP BOTTOM BOTTOM Part No. 1110550 61 Invacare® Tracer® SX5 Wheelchair