JVC D347US Instruction Manual - Page 18
LCD Monitor And Viewfinder, Zooming, VIDEO RECORDING
UPC - 046838026928
View all JVC D347US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 EN VIDEO RECORDING LCD Monitor And Viewfinder While using the LCD monitor: Make sure the viewfinder is pushed back in. Pull on the end A of the LCD monitor and open the LCD monitor fully. It can rotate 270° (90° downward, 180° upward). 180˚ Zooming Produces the zoom in/out effect, or an instantaneous change in image magnification. Zoom In Slide the Power Zoom Lever towards "T". Zoom Out Slide the Power Zoom Lever towards "W". ● The further you slide the Power Zoom Lever, the quicker the zoom action. Zoom in (T: Telephoto) 90˚ While using the viewfinder: Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully. NOTES: ● The image will not appear simultaneously on the LCD monitor and the viewfinder. When the viewfinder is pulled out while the LCD monitor is opened, you can select which one to use. Set "PRIORITY" to the desired mode in SYSTEM Menu. (੬ pg. 22, 24) ● Colored bright spots may appear all over the LCD monitor or the viewfinder. However, this is not a malfunction. (੬ pg. 36) 1x 10x 20x 40x Zoom out (W: Wide angle) 10 x Digital zoom zone 28X (optical) zoom zone Approximate zoom ratio NOTES: ● Focusing may become unstable during Zooming. In this case, set the zoom while in RecordStandby, lock the focus by using the manual focus (੬ pg. 27), then zoom in or out in Record mode. ● Zooming is possible to a maximum of 800X, or it can be switched to 28X magnification using the optical zoom. (੬ pg. 23) ● Zoom magnification of over 28X is done through Digital image processing, and is therefore called Digital Zoom. ● During Digital zoom, the quality of image may suffer. ● Macro shooting (as close as approx. 5 cm (2") to the subject) is possible when the Power Zoom Lever is set all the way to "W". Also see "TELE MACRO" in FUNCTION Menu on page 23. ● When shooting a subject close to the lens, zoom out first. If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when "TELE MACRO" is set to "ON". (੬ pg. 23)