JVC DT-N17F Instruction Manual - Page 19

General Model name Type Screen size Aspect ratio Horizontal/vertical frequency (computer signal) Compliant video signal format Format Audio output Operating conditions Power requirements Rated current External dimensions (excluding protruding parts) Weight Accessories DT-N17F Multi format LCD monitor Type 17.3 wide format 16:9 H: 61.93 kHz - 92.9 kHz V: 50 Hz - 75 Hz * Some signals within this frequency range may not be displayed "Available signals" on page 21 3G SDI: SMPTE-425M-A/B HD SDI: BTA S-004C, SMPTE292M, SMPTE-425M-A/B, SMPTE-274M, SMPTE-RP211, SMPTE-296M SD SDI: SMPTE-125M, ITU-R BT.656 2K: SMPTE ST 2048-1: 2011 EMBEDDED AUDIO: SMPTE299M, SMPTE272M Internal speaker: 2.5W(8Ω) Operating temperature: 0°C - 40°C (41°F - 95°F) Operating humidity: 20% - 80% (non-condensing) (Slightly variable depending on ambient conditions for installation.) AC 120 V / AC 220 - 240 V, 50 Hz/60 Hz; DC11j17V 1.5A (AC 100Vj240V) 3.0A (DC11j17V) with the stand Width: 430.5 mm (16 15/16˝) Height: 328.7 mm (12 15/16˝) Depth: 135 mm (5 1/4˝) 4.65 kg(10.25lbs) (with the stand) AC power cord x 1 without the stand 430.5 mm (16 15/16˝) 310.4 mm (12 1/4˝) 73 mm (2 7/8˝) LCD panel Type e Number of pixels displayed Number of colors displayed Viewing angle (TYP.) Brightness (TYP.) Contrast ratio (TYP.) 17.3˝ wide, active matrix TFT Width: 381.89 mm (15˝) Height: 214.81 mm (8 7/16˝) Diagonal: 439.42 mm (17 5/16˝) 1920 x 1080 262,144 160° (Horizontally),160° (Vertically) 300cd/m 2 700:1 Video Input/output terminals CVBS HDMI Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75 Ω * The input (IN) and output (OUT) terminals HDMI connector x 2(IN and OUT) VGA 1 Line, mini D-SUB 15pin x1(IN) YPbPr Y: 1 V(p-p), 75 Ω(with sync) Pb : 0.7 V (p-p), 75 Ω Pr: 0.7 V (p-p), 75 Ω E. AUDIO 3G/ HD/SD SDI Digital signal input (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2 E. AUDIO 3G/ HD/SD SDI Digital signal output (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2 AUDIO (IN) Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance AUDIO (MONITOR OUT) GPI (MAKE) Speaker: 2.5W+2.5W(8Ω) 3.5mm phone "Using the GPI control" on page 17. UMD (RS-485) UMD (RS-232C) "Using the UMD control" on page 17. Audio External control 19