JVC DT-N17H Instruction Manual - Page 8

Index of Parts and Functionos (cont.) Front panel Tally lamp This lamp is controlled by the tally function of the Make contact terminal. ( External Control on Page 17.) • You can select the color of the tally lamp from "Green", "Red", or "Yellow". 5 7 SDI1 SDI2 HDMI ANALOG F1 F2 F3 F4 F5 INFO ON/OFF VOLUME MENU/PUSH BRIGHT CONTRAST SATURATION POWER PHONE 1 2 3 4 6 8 1 Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in) 2 INPUT SELECT buttons/lamps Selects an input. SDI 1: E. AUDIO 3G/HD/SD SDI (IN 1) terminal SDI 2: E. AUDIO 3G/HD/SD SDI (IN 2) terminal HDMI:HDMI terminal ANALOG: select from CVBS, VGA, Y/ Pb / Pr signal °The lamp for the selected input lights 3 FUNCTION button You can use the functions assigned to this button. 4 DISP button 5 VOLUME MENU/PUSH When the menu is inactivated, press "VOLUME MENU/PUSH" to turn on the main menu Revolve "VOLUME MENU/PUSH" to adjust settings or parameters, and press to apply When the menu is inactivated, revolve "VOLUME MENU/PUSH" to adjust the sound volume 6 Picture adjustment knob BRIGHTğAdjusts the picture brightness and the default value is 50. CONTRASTğAdjusts the picture contrast and the default value is 50. SATURATIONğAdjusts the picture saturation and the default value is 50. * Directly press BRIGHT/CONTRAST/SATURATION knobs, the parameters will recover to default value. 7 POWER 8 PHONE 3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring. 8