JVC DT-N21F Instruction Manual - Page 12

UMD setup

Get JVC DT-N21F PDF manuals and user guides View all JVC DT-N21F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

UMD Setting UMD control parameters (TSL UMD Protocol V3.1/4.0, provided by Television System LTD.) Item Exit RS485 Address Position Display Type Baud Rate Parity Serial Port Source ID To do Return Main Menu Address setting 1 to 126: Set a particular address Position setting Choose Display Type Baud Rate setting Parity setting Choose Serial Port Setting of "Source ID"*1 Setting value 1 to 126 TopaBottom Source IDaUMD 38400a9600a19200 EvenaNone RS485aRS232 *1 Setting of "Source ID" (1) Change the input to one that you want to assign a video source name for. (2) Select "Source ID" Each time you revolve the "MENU" button, the character changes as follows. Space 0~9 A~Z a~z (4) Press the "MENU" button to move the arrow to the next space The characters entered before moving the arrow are memorized. (5) Repeat steps (3) and (4) (10 characters at maximum). (6) Press MENU button to store the name. UMD setup (1) Connect the external control equipment with the monitor (2) Set "Display Type" to "UMD" (3) Set "Serial Port" to RS485 or RS232 according to the port type of external control equipment (4) Make sure the "address", "Baud Rate", "Parity" the same (5) Adjust the external control equipment and send UMD command, the UMD information will be display as the right photo. User can set the character and color of the UMD and the color of Tally1 and 2. Tally1 UMD Tally2 CAMERA 1 Marker Settings for marker functions Item Exit Marker To do Return Main Menu Display setting Setting value aOn Marker Select Safety Area Fit Marker*1 Center Marker Adjust the ratio of marker Safety Area setting Fit Marker setting Display setting a4:3a13:9a14:9a15:9a16:9a1.85:1a2.35:1 a80%a85%a90%a93%a95% aOn aOn Marker Color Marker Outside Marker color setting Marker Outside color setting WhiteaRedaGreenaBlueaBlackaGray aGrayaBlack of actual display screen. When "Fit Marker" is On, the size of safety area is benchmarked against the area inside the scales marker, accounting for 80% ~ 95% of the area inside the scales marker. Example: Safety Area Marker select Center Marker Marker Outside 12 Marker: 4:3 Safety Area: 85% Center Marker: On Marker: 4:3 Safety Area: 85% Fit Marker: On

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
12
UMD setup
UMD
Setting UMD control parameters (TSL UMD Protocol V3.1/4.0, provided by Television System LTD.)
Item
Exit
Position
Display Type
Baud Rate
Parity
Serial Port
Source ID
To do
Return Main Menu
Address setting
1 to 126: Set a particular address
Position setting
Choose Display Type
Baud Rate setting
Parity setting
Choose Serial Port
Setting of “Source ID”*1
Setting value
Top
、
Bottom
Source ID
、
UMD
38400
、
9600
、
19200
Even
、
None
RS485
、
RS232
1 to 126
RS485 Address
*1
Setting of “Source ID”
(1) Change the input to one that you want to assign a video source name for.
(2) Select “Source ID”
Each time you revolve the “MENU” button, the character changes as follows.
(4)
Press the “MENU” button to move the arrow to the next space.
±±±±±±±±±±±±±
The characters entered before moving the arrow are memorized.
(5) Repeat steps (3) and (4) (10 characters at maximum).
(6) Press MENU button to store the name.
Space
0~9
A~Z
a~z
&()*+,-./:<>_
(1)
Connect the external control equipment with the monitor
(2)
Set “Display Type” to “UMD”
(3)
Set “Serial Port” to RS485 or RS232 according to the port type of external
control equipment
(4)
Make sure the “address”, “Baud Rate”, “Parity” the same
(5)
Adjust the external control equipment and send UMD command, the UMD
information will be display as the right photo.
User can set the character and color of the UMD and the color of Tally1 and 2.
of
actual display screen. When “Fit Marker” is On, the size of safety area is benchmarked against the area inside the scales marker,
accounting for 80% ~ 95% of the area inside the scales marker.
Example:
Item
Exit
Safety Area
Fit Marker*1
Marker Color
Marker Outside
To do
Return Main Menu
Display setting
Adjust the ratio of marker
Safety Area setting
Fit Marker setting
Display setting
Marker color setting
Marker Outside color setting
Setting value
、
4:3
、
13:9
、
14:9
、
15:9
、
16:9
、
1.85:1
、
2.35:1
、
80%
、
85%
、
90%
、
93%
、
95%
、
On
White
、
Red
、
Green
、
Blue
、
Black
、
Gray
、
Gray
、
Black
Marker
Marker Select
、
On
Center Marker
、
On
Marker
Settings for marker functions
Safety Area
Marker select
Center Marker
Marker Outside
Marker: 4:3
Safety Area: 85%
Center Marker: On
Marker: 4:3
Safety Area: 85%
Fit Marker: On
CAMERA 1
Tally1
UMD
Tally2