JVC FS-8000 Instructions - Page 18
Setting the SLEEP Timer
View all JVC FS-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English s3. Setting the OFF time (Example: PM 1:15). 1. Press the TIMER/SNOOZE button on the Unit. The current OFF time blinks on the display. (After 2 seconds) 2. Press the ¢ or 4 button on the Unit to set the time you want the Unit to be turned off. Pressing the ¢ button moves the time forwards and pressing the 4 button moves the time backwards. Hold down the button to move the time in 10-minute intervals. s4. Selecting the music source. 1. Press the TIMER/SNOOZE button on the Unit. "TUNER" blinks on the display. 2. Press the ¢ or 4 button to select the music source you want to listen to. The display changes as shown below. s5. Setting the volume level. 1. Press the TIMER/SNOOZE button on the Unit. The current volume setting blinks on the display. 2. Press the ¢ or 4 button to select the volume level -- : The current volume level will be used. 1 to 5: Low (1) to high (5) level. When the timer is turned on, the Volume will be automatically turned to the set position. VOLUME VOL 5 VOL 5: Approx. 11 o'clock position VOL 1: Approx. 8 o'clock position VOL 1 Note: The volume level for VOL1 to VOL5 will vary according to the current volume gain selection (0 dB, -6 dB or -12 dB). So, you should learn the actual volume level beforehand. s6. Press the TIMER/SNOOZE button on the Unit. The timer setting is completed and the display returns to the display before you set the timer (The Timer indicator remains lit). s7. Before turning off the Unit, prepare the music source selected in step 4. Tuner: Tune in to the desired station. CD: Insert a CD. s8. Press the POWER button to turn off the System. To cancel the timer, press the TIMER/SNOOZE button. The Timer indicator goes out on the display. To re-activate the cancelled timer, press the TIMER/ SNOOZE button to light the Timer indicator. Then, press the TIMER/SNOOZE button repeatedly until the display returns to the original display before setting the timer. (Be sure that the Timer 15 indicator is lit) To confirm the timer settings, cancel the timer once by pressing the TIMER/SNOOZE button. Then, press the TIMER/ SNOOZE button repeatedly, and you can see the current timer settings (ON time, OFF time, source, and volume). To change the timer setting, repeat the setting procedure from the beginning. • When the timer turns on, the Timer indicator starts blinking. • When the timer turns on, it is possible to fade in the sound from volume level 0 (zero) to the preset volume. CAUTION: If the System is unplugged, or a power failure occurs, the timer setting will be lost after about 24 hours. You will need to reset the clock first, then the timer. 5-Minute Snoozing---------- When the timer turns on the music source you can, if you wish, activate the 5-minute snoozing function to temporarily stop playback. Press the TIMER/SNOOZE button on the Unit. The "SNZ" indicator lights up on the display and the power is turned off for five minutes for snoozing. Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by itself rather than play all night. s You can only set the Sleep Timer when the System is on and a source is playing. s1. Play a CD or tune in to the desired station. s2. Press the SLEEP button on the Remote Control. The "SLEEP" indicator lights up. s3. Set the length of time you want the source to play before shutting off. • Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence: = 30 = 60 = 90 = 120 = Cancelled = (back to the beginning) After setting the number of minutes for the Sleep Timer, the display will stop blinking after 5 seconds and return to the display as before setting the Sleep Timer. The System is now set to turn off after the number of minutes you set. To Confirm the Sleep Time When the SLEEP button is pressed, the remaining sleep time is displayed. Wait for 5 seconds until the display returns to the original display. To Cancel the SLEEP Timer Setting Press the SLEEP button until the "SLEEP" indicator goes off on the display. Turning off the System also cancels the SLEEP Timer. s If you are setting the Daily Timer, the System will be turned on at the set time to wake you up.