JVC GY-DV300U Installing the KA-DV300/350 Network Pack and accessory cards
JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Manual
 |
View all JVC GY-DV300U manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC GY-DV300U manual content summary:
- JVC GY-DV300U | Installing the KA-DV300/350 Network Pack and accessory cards - Page 1
JVC PROFESSIONAL PRODUCTS COMPANY Application Note 1 Subject: Installing the KA-DV300/350 Network Pack and accessory cards Objective Before you can stream video or record to a CompactFlash (CF) memory card, you must attach the KA-DV300 or KA-DV350 Network Pack to the GY-DV300 camcorder. Once - JVC GY-DV300U | Installing the KA-DV300/350 Network Pack and accessory cards - Page 2
of the GY-DV300 below the battery compartment. 4. Rotate the network pack upward toward the GY-DV300 until a positive 'click' is heard and felt. 5. To remove the KA-DV300 Network Pack, press the release button on the front of the pack and pull away from the camera. Inserting Accessory Card 1. Insure
-
1 -
2
 |
 |
Page 1 of 2
JVC
PROFESSIONAL
PRODUCTS
COMPANY
Application Note 1
Subject:
Installing the KA-DV300/350 Network Pack and accessory cards
Objective
Before you can stream video or record to a CompactFlash (CF) memory card, you must attach the KA-DV300 or
KA-DV350 Network Pack to the GY-DV300 camcorder. Once installed, accessory cards, such as a LAN or CF
memory card must be installed.
What you need
•
GY-DV300 camcorder
•
KA-DV300 network pack or KA-DV350 Cisco Aironet 350 enabled network pack
•
One of the following accessory cards, depending on application:
Wired LAN:
Socket Communications (
www.socketcom.com
) EA2900-117. A CF to PCMCIA (PC
Card) adapter is required.
Wireless LAN:
Linksys (
www.linksys.com
) WCF11.
A
type II
CF to PCMCIA (PC Card) adapter is
required.
Socket Communications (
www.socketcom.com
) WL6000-320. A CF to PCMCIA
adapter is required (can only be used with KA-DV300 firmware revision 2.0 or later).
Symbol Technologies (
www.symbol.com
) Wireless Networker CompactFlash Card.
A CF to PCMCIA (PC Card) adapter is required (can only be used with KA-DV300
firmware revision 2.0 or later).
Cisco (
www.cisco.com
) Aironet 350 model AIR-PCM35x (can only be used with a
KA-V350 network pack).
CF Memory:
SanDisk (
www.sandisk.com
) SDCFB-16 ~ SDCFB-256. A CF to PCMCIA adapter is
required.
Attaching the Network Pack to the Camera
1.
Insure that the GY-DV300 power is off.
2.
Slide the connector cover located on the bottom of the GY-DV300 in the direction as shown by
the arrow located next to the connector cover.