JVC GY-DV300U Installing the KA-DV300/350 Network Pack and accessory cards - Page 2

3. Align the hook on the network pack with the cutout on the rear of the GY-DV300 below the battery compartment. 4. Rotate the network pack upward toward the GY-DV300 until a positive 'click' is heard and felt. 5. To remove the KA-DV300 Network Pack, press the release button on the front of the pack and pull away from the camera. Inserting Accessory Card 1. Insure that the GY-DV300 power is OFF. 2. Insert the accessory card into the network pack. Please note that some accessory cards will require an adapter. 3. The card can only be inserted in one direction. Do not force the card into the slot. 4. Turn on the power to the GY-DV300. 5. The status of the inserted card is displayed on the LCD and/or viewfinder screen. NOTES: • When turning the power on, the card status display will flash during initialization. • Inserting a card with the power ON may result in damage to the card. JVC wants you to get the most from your Streamcorder. If you have any comments, concerns, or questions, please feel free to contact us at [email protected]. z Page 2 of 2