JVC GY-DV550E Instruction Manual - Page 103

14-3 Specifications CAMERA SECTION Image pickup devices: 1/2-inch interline CCD x 3 Color separation optical system: F1.4 3-color separation prism Number of effective pixels: Approx. 380,000 pixels ((H) 768 x (V) 494) Color system : NTSC (R-Y, B-Y encoder) Color bars : SMPTE color bar Sync system : Internal sync (built-in SSG) External sync (VBS or BB) Lens mount : Bayonet system (compatible with 1/2-inch lenses) Optical filter : 3200 K, 5600K + 1/8ND, 5600 K + 1/64ND Sensitivity : F11, 2000 lx Minimum illumination: 0.75 lx (F1.4, LOLUX mode) Calculated value S/N (VIDEO OUT output) : 62 dB (Typical) Horizontal resolution : 750 lines (Center) Gain : -3, 0, 3, 6, 9, 12, 18 dB, ALC, LOLUX, Shutter speed : 1/100, 1/250, 1/500, 1/1000, 1/2000 V.SCAN speed : 60.1 Hz to 2084.6 Hz Registration : 0.05% or less (excluding lens distortion) Contour correction : Horizontal: dual-edged. Vertical: 2 H VCR SECTION Format Tape speed Record/Play time F.F/Rewind time : Mini DV (SP mode only) : 18.812 mm/s : 60 minutes (With M-DV60ME cassette) : Approx. 3 minutes 30 seconds (With M-DV60ME cassette) [VIDEO] Recording format : 8-bit, 13.5 MHz, 4:1:1 component recording [AUDIO] Recording format : 16-bit, 48 kHz, 2-channel PCM audio/12-bit, 32 kHz 4-channel PCM audio (2 channels only for recording) Frequency response : 20 Hz to 20 kHz Wow & flutter : Below measurable limit [Time Code System] Time code signal LTC input LTC output : Compliance with SMPTE standard : 0 dBs ± 6 dBs, high impedance, unbalanced : 0 dBs ± 6 dBs, low impedance, unbalanced 14. OTHERS INPUT/OUTPUT SIGNALS Video signal output : 1 V (p-p), 75 ohms (BNC) unbalanced composite output. YC output : Y 1 V (p-p) 75 ohms unbalance C 0.286 V (p-p) 75 ohms unbalance (4-pin) PROMPTER output : Return/prompter video signal output External video signal : Composite video signals input 1 V (p-p) ±0.3 V (p-p) 75 ohms unbalance (BNC) Bandwidth 6.75 MHz VTR/RM multi-pin : Camera composite video signal connector output (Y/C/RGB/CPN can be selected in menu) (26-pin) Lens : 12-pin connector Audio input : Microphone -60dBs, 3 kohm balanced Line +4dBs, 10 kohm balanced Audio output : -6 dBs, low impedance, unbalanced Earphone output : -60 dBs to -17 dBs, at 8-ohm load Monaural audio (mini jack) DC input : 12V DC (11V to 15 V DC) (XLR-4) Auxiliary power output : 12 V DC, max. 0.1A (11V to 15 V DC) DV connector : 4-pin RS-232C : Mini DIN 6-pin GENERAL Power consumption : 34 W (when recording) Mass : Approx. 4 kg Operating temperatures : 0 °C to 40 °C Operating humidity : 30 % to 80 % RH Storage temperatures: -20 °C to 60 °C ACCESSORIES Microphone Tripod base Lithium battery Head cleaning tape Instructions : x1 : x1 : x 1 (CR2032) : x1 : x1 Design and specifications are subject to change without notice. 103