JVC GZ-HM400US Guide Book - Page 83
Basic Settings, Cont. Shooting Speed, High Speed, Medium Speed, Low Speed], Snapshot, Demo Mode
UPC - 046838040238
View all JVC GZ-HM400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Changing the Menu Settings (Continued) Menus Y BASIC SETTINGS @ CONT. SHOOTING SPEED Sets the interval for continuous shooting. Settings: [ ] = Factory-preset Select [BASIC SETTINGS], then select sub-menus. With each setting, continuous recording is performed at the following speed: HIGH SPEED: 6 frames in 0.4 seconds at 15 frames per second. ( ) MEDIUM SPEED: 6 frames in 0.9 seconds at 7 frames per second. ( ) [LOW SPEED]: 2 frames per second while SNAPSHOT is pressed. ( ) NOTE The continuous shooting speed will drop if this function is used repeatedly. [ DEMO MODE Introduces special features of the camcorder when there is no operation for about 3 minutes during recording mode. ( AUTO POWER OFF If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. \ OPERATION SOUND Turns on/off the operation sound. OFF: Deactivates the function. [ON]: Activates the function. NOTE • The demonstration only works when the AC adapter is connected, not with the battery pack. • If an SD card is in the camcorder, demonstration will not take place even if this mode is set to [ON]. OFF: Disables the function. [ON]: Activates the function. To turn the camcorder on again, close the LCD monitor and open it again when using the battery pack. When using the AC adapter, perform any operation such as zooming. OFF: Turns off the operation sound. [ON]: The melody sounds when operations are performed. RECORD BUTTON Enables the recording button [REC] on the LCD monitor. ` QUICK RESTART Enables the camcorder to start up quickly when you turn off the camcorder and then on again within 5 minutes by closing and opening the LCD monitor. OFF: Deactivates the function. [ON]: Activates the function. OFF: Deactivates the function. [ON]: If the LCD monitor is opened again within 5 minutes, the camcorder starts quickly. The power consumption used for the 5 minute period after the LCD monitor is closed is approximately 1/3 that used during recording. This enables you to save more power than leaving the power on. 82 EN