JVC GZHM200RUS Instructions - Page 18
Necessary Settings before Use, Charging the Battery Pack
UPC - 046838038860
View all JVC GZHM200RUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Necessary Settings before Use Charging the Battery Pack 1 Close the LCD monitor to turn off the camcorder. 2 Attach the battery pack, then connect the AC adapter. • With the " " (arrow) on the battery pack pointing at the correct direction, slide the battery pack until it locks in place. Charge Lamp Arrow DC connector Required charging/recording time (approx.) *When the LED light is off and the monitor backlight is set to [STANDARD] mode. Battery pack Charging time Recording time BN-VF808U (Provided) 1 hr. 50 min. 1 hr. 25 min.* BN-VF815U 2 hr. 40 min. 3 hr.* BN-VF823U 3 hr. 40 min. 4 hr. 30 min.* To detach the battery pack Slide and hold BATT., then remove the battery pack. AC Adapter To AC Outlet (110V to 240V) • The power/charge lamp blinks to indicate charging has started. • When the lamp goes out, charging is finished. To check the remaining battery power See page 25. NOTE • You can also use the camcorder with just the AC adapter. • The actual recording time may shorten depending on the recording environment, such as when recording scenes with fast moving subject. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. 18