JVC GZHM200RUS Guide Book - Page 21

Using an SD Card, IMAGE SLOT SELECTION] to [SLOT A]

Get JVC GZHM200RUS - Everio Camcorder - 1080p PDF manuals and user guides
UPC - 046838038860
View all JVC GZHM200RUS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

ENGLISH GETTING STARTED Using an SD Card • Operations are confirmed on the following SD cards: Class 4 or higher compatible SD or SDHC card. Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB) For UXP mode, use Class 6 or higher. • If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded. • MultiMediaCards are not supported. • Cards used to record video on this camcorder cannot be played back on other devices. • Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using, might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card. • Video data may not be recorded onto the SD cards on which video data have already been recorded using the devices from other manufacturers. Insert an SD card Preparation: Press Power ( ) button to turn off the camcorder. 1 Open the SD card cover. Push the cover up gently, to open it. 2 Firmly insert the card with its clipped edge first. Clipped Edge 3 Close the SD card cover.  To remove an SD card Push the SD card once. After the card comes out a little, pull it out. NOTE • Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted. • Do not touch the terminal on the reverse side of the label. Change the recording medium The camcorder is programmed to record in [SLOT A] when it is shipped from the factory. You can change the recording medium to [SLOT B]. Set [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B] (Z p. 66). MEDIA SETTINGS VIDEO SLOT SELECTION SLOT A IMAGE SLOT SELECTION FORMAT SDSCLOARTDB SET QUIT INFORMATION • Recording media switches automatically from Slot A to Slot B and vise versa after the card in the selected slot is full. ( Z p. 63) • You can conveniently record your video and shoot still image in separate SD cards by selecting the card slot (A or B) for each purpose. ( Z p. 66) Format an SD card when using it for the first time Select [FORMAT SD CARD] to format the card. (Z p. 66) MEDIA SETTINGS VIDEO SLOT SELECTION IMAGE SLOT SELECTION FORMAT SD CARD ERASE ALL DATA ON SET QUIT 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
±1
ENGLISH
GETTING
STARTED
Using an SD Card
•
Operations are confirmed on the following SD
cards:
Class 4 or higher compatible SD or SDHC card.
Panasonic, TOSHIBA, SanDisk, ATP SD card
(256 MB to 2 GB) or SDHC card (4 GB to 32
GB)
For UXP mode, use Class 6 or higher.
•
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
•
MultiMediaCards are not supported.
•
Cards used to record video on this
camcorder cannot be played back on other
devices.
•
Some card readers (including internal card
readers in PCs) may not be able to support
SDHC format.
If you use an SDHC card for
recording and encounter any reading error,
the card reader you are using, might be a
non-SDHC supported device.
Please use
the camcorder or other SDHC compatible
devices to access the card.
•
Video data may not be recorded onto the
SD cards on which video data have already
been recorded using the devices from other
manufacturers.
Insert an SD card
Preparation:
Press Power (
) button to turn off the
camcorder.
1
Open the SD card cover.
Push the cover up gently, to open it.
2
Firmly insert the card with its clipped
edge first.
3
Close the SD card cover.
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
NOTE
•
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
•
Do not touch the terminal on the reverse
side of the label.
Change the recording medium
The camcorder is programmed to record in
[SLOT A] when it is shipped from the factory.
You can change the recording medium to
[SLOT B].
Set [VIDEO SLOT SELECTION] and
[IMAGE SLOT SELECTION] to [SLOT A]
or [SLOT B] (
Z
p. 66).
MEDIA SETTINGS
VIDEO SLOT SELECTION
IMAGE SLOT SELECTION
FORMAT SD CARD
QUIT
SET
SLOT B
SLOT A
INFORMATION
•
Recording media switches automatically
from Slot A to Slot B and vise versa after the
card in the selected slot is full. (
Z
p. 63)
•
You can conveniently record your video
and shoot still image in separate SD cards
by selecting the card slot (A or B) for each
purpose. (
Z
p. 66)
Format an SD card when using it for the
first time
Select [FORMAT SD CARD] to format
the card. (
Z
p. 66)
ERASE ALL DATA ON
MEDIA SETTINGS
VIDEO SLOT SELECTION
IMAGE SLOT SELECTION
FORMAT SD CARD
QUIT
SET
Clipped
Edge