JVC GZMG330AUS Instruction Manual - Page 35
Warning Indications
UPC - 046838032622
View all JVC GZMG330AUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ENGLISH Warning Indications Indication Meaning/Action ੬ • Displays the remaining battery power. - (Battery indicator) High Exhausted • As the battery power comes close to nil, the battery - indicator blinks. When the battery power is exhausted, power turns off automatically. SET DATE/TIME! • Appears when the date/time is not set. 14 • The built-in clock's rechargeable lithium battery is 14 discharged, so the previously set date/time is erased. Connect the camera to an AC outlet using the AC adapter for over 24 hours to charge the clock's lithium battery. Then set the date/time. CHECK LENS COVER • Appears for 5 seconds after power is turned on in recording - mode if the lens cover is closed or when it is dark. • Perform clean up to restore the capacity of the recording media. - • Turn off the camera. Remove the microSD card and insert it - again. Turn on the camera after inserting the microSD card. HDD ERROR! If the error message appears again, replace the card with MEMORY CARD ERROR! one that is certified to operate correctly. • It is also recommended to run check disc regularly on the - PC, providing that there is no data on the hard disk of the camera. VIDEO MANAGEMENT • The video management file is broken. Recovery is required - FILE IS BROKEN. TO to record or play back video files. Select [YES], then touch RECORD/PLAYBACK the OK button to recover the video management file. VIDEO, RECOVERY IS REQUIRED. RECOVER? RECORDING FAILURE • The writing speed of recording medium is slow, or the - recording medium is corrupted. Use a microSD card that is guaranteed to operate correctly. • The hard disk was subjected to vibrations or jolts. Be careful - not to subject the hard disk to vibrations or jolts. • Appears when the recording medium is full and recording 20 is not possible. Delete unnecessary files, or replace the microSD card. POWER IS OFF, OR USB DEVICE IS UNSUPPORTED • Appears when an incompatible USB device is connected to - the camera. • Appears when a DVD burner that is switched off is - connected. If you want to use the DVD burner, switch the power on. DROP DETECTION • To turn on the camera again, close the LCD monitor and - WORKED AND THE open it again. POWER IS TURNED OFF 35