JVC HR-XVC28B Instruction Manual - Page 40

40 EN Basic Playback ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. Load a disc. OPEN/CLOSE OPERATIONS ON DVD DECK A Load the disc. ● For details, refer to "Placing a Disc" (੬ pg. 8). B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up on the front display panel. On the Remote Press DVD so that the DVD indicator lights up on the front display panel. C Start playback. Press 4 PLAY. Example: DVD VIDEO Title number Chapter number VCR/DVD 7 STOP 3 PLAY Slide to the right. DVD Number keys RETURN TOP MENU 3 PLAY 1 REW 7 STOP 4 SKIP SKIP ¢ MENU ENTER DISPLAY FF ¡ 8 PAUSE ATTENTION ● You can not use the DVD deck when the VCR deck is in the Automatic Satellite Recording standby and recording mode. ● You can use the DVD deck when the VCR deck is in the timer standby mode. ● If the unit does not accept an operation, appears on the TV screen. (Operations are occasionally unacceptable even if is not displayed.) To play back a JPEG disc, see pages 49 - 51. Playback time ● You can switch the display on the front display panel between the title/chapter/track number and the playback time by pressing DISPLAY. ● It may take a few seconds to start playback. ● When inserting a DVD or Video CD disc, a menu display may appear on the TV screen. To play back from the menu, refer to "Locating a Desired Scene Using the Menu of the Video CD with Playback Control (PBC) Function" (੬ pg. 41) or "Locating a desired scene using the DVD menu" (੬ pg. 41). D Pause playback. Press 9 PAUSE. ● To resume normal playback, press 4 PLAY. E Stop playback. Press 8 STOP. ● When "RESUME" (੬ pg. 64) is "ON," the unit memorizes the position on the disc where you have interrupted playback. -To resume playback, press 4 PLAY. -To stop playback completely, press 8 STOP again. ● Press x OPEN/CLOSE on the DVD deck to open the disc tray, then remove the disc.