JVC HR-XVC33U Supplementary Material - Page 16
Component Video, Connection
View all JVC HR-XVC33U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 EN Component Video Connection (DVD deck only) ATTENTION Be sure to connect the unit's VIDEO OUTPUT (DVD/ VCR) connector to the TV's VIDEO input connector. Antenna or Cable Coaxial cable Flat feeder Matching transformer (not supplied) AC outlet COMPONENT VIDEO OUT AUDIO OUTPUT AC power cord VIDEO OUTPUT PCM/STREAM Back of unit OPTICAL COAXIAL VHF/UHF IN Component Video cable (not supplied) Audio/Video cable (not supplied) VHF/UHF OUT RF cable (supplied) INSTALLING YOUR NEW UNIT (cont.) 8 To connect to a TV with component video input connectors . . . A Connect the unit to TV. A Connect the aerial, unit and TV as per "AV Connection". (੬ pg. 14) B Connect the unit's COMPONENT VIDEO OUT connectors to the TV's component video input connectors. B Connect the unit to power source. Plug the end of the AC power cord into an AC outlet. This unit performs Plug & Play Set automatically. (੬ pg. 17) ● The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet. (If "AUTO" and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.) C Set the VCR channel to off. A Press POWER (1) to turn off the unit, then press STOP (8) on the unit for more than 5 seconds. "3 CH" appears on the front display panel. B Press CH +/- on the Remote to select "- CH" (off), then press OK. NOTES: ● You can obtain high-quality component video pictures. ● If your TV is not stereo-capable, use the unit's AUDIO OUTPUT connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction. ● To operate the unit with your TV using the Component Video connection, set your TV to its AV mode. You can also use the TV/VCR button on the unit's Remote to set your TV to the AV mode. (੬ pg. 73) ● For switching the TV's mode, refer to the instruction manual of your television. To Component Video Input connector To 75 ohm Terminal TV