JVC HR-XVS44U Supplementary Material - Page 89
Other Problems
View all JVC HR-XVS44U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
EN 89 OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The image of TV broadcast appears distorted on the TV screen. ● The unit leaves turned on and the DVD deck is selected. Turn off the unit, or press VCR to select the VCR deck, then press TV/VCR so that the VCR indicator disappears from the front display panel. 2. Whistling or howling is heard from the ● The camcorder's microphone is too TV during camcorder recording. close to the TV. Position the camcorder so its microphone is away from the TV. ● The TV's volume is too high. Turn the TV's volume down. 3. When scanning channels, some of them are skipped over. ● Those channels have been designated to If you need the skipped channels, restore be skipped. them. (੬ pg. 27) 4. The channel cannot be changed. ● Recording is in progress. Press PAUSE (9) to pause the recording, change channels, then press PLAY (4) to resume recording. 5. Channel settings that were made manually seem to have changed or disappeared. ● After the manual settings were made, Auto Channel Set was performed. Perform manual setting again. 6. Even though Auto or Semiauto Clock Set has been performed, the clock is incorrect. ● The clock setting data received from the Select a different host channel during host channel is incorrect. "Semiauto Clock Set" (੬ pg. 25), or perform "Manual Clock Set" (੬ pg. 25). ATTENTION This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the cassette. After checking the cassette, operate the unit as usual.