JVC KD-G230 Instructions - Page 2

Operations, Settings - receiver

Page 2 highlights

INSTRUCTIONS OPERATIONS Basic operations Control panel Check the current clock time/other information. See also "CLK DISP" of "General settings-PSM." Remote sensor DO NOT expose to strong light. • Turn on the power. • Turn off the power [Hold]. • Attenuate the sound (if the power is on). Volume control. Select the source. Detach the panel. Display window Playback mode / item indicator Disc indicator Disc information indicators Tr (track) indicator • MO: Lights up in monaural mode. • ST: Lights up when receiving an FM stereo broadcast with sufficient signal strength. S.BASS (super bass) indicator EQ (equalizer) indicator • Source display • Volume level indicator • Time countdown indicator Main display (time, Sound mode (iEQ: intelligent equalizer) playback information) indicator Remote controller-RM-RK50 7 Installing battery Lithium coin battery (CR2025) Warning: To prevent accidents and damage • Do not install any battery other than CR2025 or its equivalent. • Store out of reach of children. • Do not recharge, short, or dismantle. • Do not dispose of in fire. • Do not carry around with other metallic materials. For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material- special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate 7 Features • Turns the power on if pressed briefly or attenuates the sound when power is on. • Turns the power off if pressed and held. • Changes the FM/AM bands with 5 U. • Changes the preset stations with D ∞. • Changes the folders of MP3/WMA discs. • Adjusts the volume level. • Selects the sound mode (iEQ: intelligent equalizer). • Selects the source. • Searches for stations if pressed briefly. • Fast-forwards or reverses the track if pressed and held. • Changes the tracks of the disc if pressed briefly. Radio operations Disc operations Select preset station. • You can also use 5 / ∞ to select preset station. Select "FM/AM." Select the bands. Search for a station-Auto Search. Manual Search: Hold either one of the buttons until "M" flashes on the display, then press it repeatedly. When an FM stereo broadcast is hard to receive Reception improves, but stereo effect will be lost. • MO indicator lights up. To restore the stereo effect, repeat the same procedure. FM station automatic presetting-SSM (Strong-station Sequential Memory) You can preset six stations for each band. Manual presetting Example: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. External component operations Stereo mini plug (not supplied) You can connect an external component to the AUX (auxiliary) input jack on the control panel. Portable MD player, etc. Turn on the connected component and start playing the source. Eject disc. • Press SRC to listen to another playback source. • 4 /¢ [Press]: Go to the next or previous track. [Hold]: Fast-forwards or reverses the track. • 5 / ∞ : Go to the next or previous folders (for MP3/WMA discs). • [Press]: Select track (for CD) or folder* (for MP3/ WMA) number (01 - 06). • [Hold]: Select track (for CD) or folder* (for MP3/ WMA) number (07 - 12). * Folders are required to assigned with 2-digit numbers at the beginning. Turn on the power. Insert disc. All tracks will be played repeatedly until you change the source or eject the disc. Selecting the playback modes After pressing , press the following buttons to... TRK RPT : Plays the current track repeatedly. FLDR RPT* : Plays all tracks of the current folder repeatedly. RPT OFF : Cancels. FLDR RND*: Plays all tracks of the current folder, then tracks of the next folder at random. DISC RND : Plays all tracks of the current disc at random. RND OFF : Cancels. * Only for MP3/WMA. Skipping a track quickly during play • For MP3/WMA disc, you can skip a track within the same folder. Example: Select track 32 Changing the display information While playing an audio While playing an MP3 or CD or a CD Text a WMA disc : Clock with the current track number : Elapsed playing time with the current track number *1 If the current disc is an audio CD, "NO NAME" appears. *2 If an MP3/WMA file does not have tags or "TAG DISP" is set to "TAG OFF," folder name and file name appear. Prohibiting disc ejection You can lock a disc in the loading slot. To cancel the prohibition, repeat the same procedure. SETTINGS Sound adjustments Adjusting the sound Preset values BAS MID TRE S.BS Indication (For) (bass) (middle) (treble) (super bass) USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 ON CLASSIC (Classical music) +01 00 +03 OFF POPS (Light music) +02 +01 +02 OFF HIP HOP (Funk or rap music) +04 -02 +01 ON JAZZ (Jazz music) +03 00 +03 OFF BAS*2 (bass) : Adjust the bass. MID*2 (middle) : Adjust the middle frequencies sound level. TRE*2 (treble) : Adjust the treble. FAD*3 (fader) : Adjust the front and rear speaker balance. BAL (balance) : Adjust the left and right speaker balance. -06 to +06 -06 to +06 -06 to +06 R06 to F06 L06 to R06 2 - EN S.BS*2 (super bass) : Maintain the richness and fullness S.BS ON or S.BS OFF, of the bass sound regardless of 01 to 05*4 how low you set the volume. SUB.W (subwoofer) : Adjust the subwoofer output level. 00 to 08 VOL (volume) : Adjust the volume. 00 to 30 (or 50)*5 *1 Displayed only when "L/O MODE" is set to "WOOFER." *2 When you adjust the bass, middle, treble, or super bass, the adjustment you have made is stored for the currently selected sound mode (iEQ) including "USER." *3 If you are using a two-speaker system, set the fader level to "00." *4 Range adjustment for super bass is adjustable only when it is set to "S.BS ON." *5 Depending on the amplifier gain control setting. See reverse page \

  • 1
  • 2
  • 3
  • 4

2 – EN
INSTRUCTIONS
Sound adjustments
Indication (For)
BAS
(bass)
MID
(middle)
TRE
(treble)
S.BS
(super bass)
USER
(Flat sound)
00
00
00
OFF
ROCK
(Rock or disco music)
+03
00
+02
ON
CLASSIC
(Classical music)
+01
00
+03
OFF
POPS
(Light music)
+02
+01
+02
OFF
HIP HOP
(Funk or rap music)
+04
–02
+01
ON
JAZZ
(Jazz music)
+03
00
+03
OFF
FM station automatic presetting—SSM (Strong-station Sequential Memory)
You can preset six stations for each band.
When an FM stereo broadcast
is hard to receive
Adjusting the sound
BAS
*
2
(bass)
: Adjust the bass.
–06 to +06
MID
*
2
(middle)
: Adjust the middle frequencies sound level.
–06 to +06
TRE
*
2
(treble)
: Adjust the treble.
–06 to +06
FAD
*
3
(fader)
: Adjust the front and rear speaker balance.
R06 to F06
BAL
(balance)
: Adjust the left and right speaker balance.
L06 to R06
S.BS
*
2
(super bass)
:
Maintain the richness and fullness
of the bass sound regardless of
how low you set the volume.
S.BS ON or S.BS OFF,
01 to 05
*
4
SUB.W
(subwoofer)
:
Adjust the subwoofer output level.
00 to 08
VOL
(volume)
:
Adjust the volume.
00 to 30 (or 50)
*
5
*
1
Displayed only when “L/O MODE” is set to “WOOFER.”
*
2
When you adjust the bass, middle, treble, or super bass, the adjustment you
have made is stored for the currently selected sound mode (iEQ) including
“USER.”
*
3
If you are using a two-speaker system, set the fader level to “00.”
*
4
Range adjustment for super bass is adjustable only when it is set to “S.BS ON.”
*
5
Depending on the amplifier gain control setting.
Preset values
Disc operations
Eject disc.
• Press SRC to
listen to another
playback source.
4
/
¢
[Press]
: Go to the next or previous track.
[Hold]
: Fast-forwards or reverses the track.
5
/
: Go to the next or previous folders (for
MP3/WMA discs).
[Press]
: Select track (for CD) or folder
*
(for MP3/
WMA) number (01 – 06).
[Hold]
: Select track (for CD) or folder
*
(for MP3/
WMA) number (07 – 12).
*
Folders are required to assigned with 2-digit
numbers at the beginning.
Selecting the playback modes
After pressing
, press the following buttons to...
TRK RPT
: Plays the current track
repeatedly.
FLDR RPT
*
: Plays all tracks of the current
folder repeatedly.
RPT OFF
: Cancels.
FLDR RND
*
: Plays all tracks of the current
folder, then tracks of the next
folder at random.
DISC RND
: Plays all tracks of the current
disc at random.
RND OFF
: Cancels.
*
Only for MP3/WMA.
Skipping a track quickly during play
For MP3/WMA disc, you can skip a track within the
same folder.
Example: Select track 32
Changing the display information
While playing an audio
CD or a CD Text
While playing an MP3 or
a WMA disc
: Clock with the current track number
: Elapsed playing time with the current track number
*
1
If the current disc is an audio CD, “NO NAME” appears.
*
2
If an MP3/WMA file does not have tags or “TAG DISP” is
set to “TAG OFF,” folder name and file name appear.
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition,
repeat the same procedure.
OPERATIONS
Basic operations
Select the source.
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the
power is on).
Volume control.
Detach the panel.
Check the current clock time/other information.
See also “CLK DISP“ of “General settings—PSM.”
Control panel
Radio operations
Select preset station.
• You can also use
5
/
to select preset station.
Manual presetting
Example: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band.
Display window
Disc indicator
Playback mode / item indicator
MO
: Lights up in monaural mode.
ST
:
Lights up when receiving an FM stereo broadcast
with sufficient signal strength.
• Source display
• Volume level indicator
• Time countdown indicator
Main display (time,
playback information)
EQ (equalizer) indicator
Sound mode (iEQ: intelligent equalizer)
indicator
S.BASS (super bass) indicator
Disc information indicators
Tr (track) indicator
SETTINGS
Remote controller—RM-RK50
Turns the power on if pressed briefly or
attenuates the sound when power is on.
Turns the power off if pressed and held.
• Changes the FM/AM bands with
5
U.
Changes the preset stations with D
.
Changes the folders of MP3/WMA discs.
• Adjusts the volume level.
• Selects the sound mode
(iEQ: intelligent equalizer).
• Selects the source.
Searches for stations if pressed briefly.
Fast-forwards or reverses the track if
pressed and held.
Changes the tracks of the disc if pressed
briefly.
Select “FM/AM.”
Select the bands.
Search for a station—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
Remote sensor
DO NOT expose to strong light.
Reception improves, but stereo effect will be lost.
• MO indicator lights up.
To restore the stereo effect,
repeat the same procedure.
7
Installing battery
Warning: To prevent accidents and damage
Do not install any battery other than CR2025 or its
equivalent.
Store out of reach of children.
Do not recharge, short, or dismantle.
Do not dispose of in fire.
Do not carry around with other metallic materials.
Lithium coin battery (CR2025)
For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—
special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
7
Features
See reverse page
\
Stereo mini plug
(not supplied)
Portable MD
player, etc.
Turn on the connected
component and start
playing the source.
External component operations
You can connect an external component to the AUX (auxiliary) input
jack on the control panel.
Turn on the power.
Insert disc.
All tracks will be played repeatedly until you change the source or eject the disc.