JVC KD-RD97BT Instruction Manual - Page 39
IMPORTANT, Wiring connection
View all JVC KD-RD97BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Wiring connection (for KD-R870BT / KD-R770BT / KD-RD97BT / KD-RD87BT) IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Output terminals ( 33) Signal cord (not supplied) Fuse (10 A) JVC Amplifier*1 Vehicle dashboard Antenna terminal Microphone input jack ( 14) Factory wiring harness (vehicle) To the steering wheel remote control adapter Light blue/yellow STEERING WHEEL REMOTE Custom wiring harness (separately purchased) Blue: To power antenna Blue/white: To amplifier Join the same color wires together. Blue/white: Remote (200 mA max.) Orange/white: Illumination Brown (Not used) Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Recommended connection Gray: Front speaker/For 3-way crossover: mid range speaker (right) Gray/black White: Front speaker/For 3-way crossover: mid range speaker (left) White/black Purple: Rear speaker/For 3-way crossover: Tweeter (right) Purple/black Green: Rear speaker*2/For 3-way crossover: Tweeter (left) Green/black *2 Remote wire (not supplied) Ignition switch Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. *1 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit. *2 You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 22. ENGLISH 35