JVC KD-X270BT Quick Start Guide America - Page 10

Before Use Basics (on faceplate) IMPORTANT • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide. • Please keep the Guide in a safe and accessible place for future reference. WARNING Do not operate any function that takes your attention away from safe driving. CAUTION Volume setting: • Adjust the volume so that you can hear sounds outside the car to prevent accidents. • Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level. General: • Avoid using the external device if it might hinder safe driving. • Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data. • Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit. • Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected. Turn off the unit when parking at a low ceiling area. *1 Only for illustration purpose. Volume knob Detach button Attach Detach Display window*1 KD-X270BT/ KD-SX26BT Auxiliary input jack USB input terminal KD-X270BT/ KD-SX26BT How to reset Reset the unit within 5 seconds after detaching the faceplate. To On the faceplate Turn on the power Press BSRC. • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Select a source Press BSRC repeatedly. Change the display information*2 Press repeatedly. *2 One of the display information supports Music Synchronization Effect. The illumination color or brightness level of the buttons changes and synchronizes with the music level. 4