JVC KW-V20BT Instruction Manual - Page 53
Removing the unit
View all JVC KW-V20BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
CONNECTION/INSTALLATION R Connecting microphone for Bluetooth (only for KW-V40BT/KW-V20BT/ KW-V200BT) Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). Removing the unit (only for KW-40BT Region4/KW-V20BT Region 4/KW-V10 Region 4) R Removing the trim plate 1 Engage the catch pins on the extraction key (4) and remove the two locks on the lower part. Lower the frame and pull it forward. R Removing the unit 1 Remove the trim plate. (See the left column.) 2 Insert the two extraction keys (4), then pull them as illustrated so tat the unit can be removed. 4 4 2 Remove the upper two locations. • Be careful to avoid injury from the catch pins on the extraction key. 7 • The frame can be removed from the top side in the same manner. ENGLISH 53