JVC KW-V840BT Instruction Manual America

JVC KW-V840BT Manual

JVC KW-V840BT manual content summary:

  • JVC KW-V840BT | Instruction Manual America - Page 1
    MONITOR WITH DVD RECEIVER KW-V840BT MONITOR WITH RECEIVER KW-M740BT INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . © 2018 JVC KENWOOD Corporation B5A-2303-00 c (K)
  • JVC KW-V840BT | Instruction Manual America - Page 2
    to read this manual 5 Basic Operations 6 Functions of the Buttons on the Front Panel.... 6 Turning on the Unit 7 Initial Settings 7 Adjusting the volume 9 Touch screen operations 10 HOME screen descriptions 10 Source selection screen descriptions 11 Source control screen descriptions 13
  • JVC KW-V840BT | Instruction Manual America - Page 3
    Hands-Free Unit 60 Hands-Free Setup 64 Setting Up 65 Monitor Screen Setup 65 System Setup 65 User Interface Setup 66 Special Setup 67 Buttons........78 Connection/Installation 80 Before Installation 80 Installing the unit 81 Troubleshooting 85 Problems and Solutions 85 Error
  • JVC KW-V840BT | Instruction Manual America - Page 4
    unit's display when you are driving for any extended period. • If you experience problems during installation, consult your JVC dealer. ÑÑPrecautions on using this unit • When you purchase optional accessories, check with your JVC dealer to make sure that they work with your model and in your area
  • JVC KW-V840BT | Instruction Manual America - Page 5
    has not been finalized. (For the finalization process see your writing software, and your recorder instruction manual.) Before Use How to read this manual • The screens and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be
  • JVC KW-V840BT | Instruction Manual America - Page 6
    Buttons on the Front Panel KW-V840BT 1 2 34 KW-M740BT 1 34 NOTE • The panels shown in this guide are examples used to provide to insert a disc media. • Displays the popup menu screen. • Pressing for 1 second displays the Voice Recognition screen (P.61). • When the power off, turns the power
  • JVC KW-V840BT | Instruction Manual America - Page 7
    NOTE • If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.7). ●●To turn off the unit: 1 (P.9). ■■ [Display] If it is hard to see the image on the screen even, adjust the viewing angle. 1 Touch [Display]. 2 Touch [Viewing Angle
  • JVC KW-V840BT | Instruction Manual America - Page 8
    . Consult your JVC dealer for details. ■■ [DEMO] Set the demonstration mode. Default is "ON". 1 Touch [DEMO] and set ON or OFF. 2 Touch [Finish]. 4 Touch [Security]. NOTE • These settings can be set from the SETUP menu. See Setting Up (P.65). hhSecurity screen appears. 5 Touch [Security Code Set
  • JVC KW-V840BT | Instruction Manual America - Page 9
    /clock settings 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. 4 Touch [User Interface]. Basic Operations ■■[Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually. (P.66) NOTE • Please set the date and time. If it is not
  • JVC KW-V840BT | Instruction Manual America - Page 10
    . (P.11) 6 • Touch to eject the disc. • Touch and hold to forcibly ejects the disc. KW-V840BT only 7 • Displays the Hands Free screen. (P.60) • When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto. Display the HOME 1 Press the [
  • JVC KW-V840BT | Instruction Manual America - Page 11
    to the Spotify. (P.26) • Switches to an external component connected to the AV-IN input terminal. (P.52) • Displays the WebLink screen. (P.28) • Displays the Audio screen. (P.70) • Turns off the AV source. (P.12) • Turn off the unit. (P.7) • For sources and information displayed when an ADS adapter
  • JVC KW-V840BT | Instruction Manual America - Page 12
    , [Apple CarPlay] is displayed. When an Android device compatible with Android Auto is connected, [Android Auto] is displayed. *2 KW-V840BT only To select the playback source on the HOME screen To turn off the AV source 1 Touch [ ]. 2 Touch [AV Off]. The 3 items displayed on the source selection
  • JVC KW-V840BT | Instruction Manual America - Page 13
    changes to the one you have set as a short-cut. For the shortcut setting, refer to Customize Short-cut buttons on HOME screen (P.12). Basic Operations 4 [G] (KW-V840BT) • Touch to eject the disc. • Touch and hold to forcibly ejects the disc. • To forcibly eject the disc, touch it for 2 seconds
  • JVC KW-V840BT | Instruction Manual America - Page 14
    ejects the disc. • To forcibly eject the disc, touch it for 2 seconds and touch [Yes] after the message is displayed. KW-V840BT only • Touch to display the Hands Free screen. (P.60) • When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto
  • JVC KW-V840BT | Instruction Manual America - Page 15
    Disc (KW-V840BT) Playing a disc ÑÑInsert a disc 1 Insert the disc into the slot. hhThe unit loads . Disc DVD/ VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • The screen shot below is for DVD. It may be different from the one for VCD.
  • JVC KW-V840BT | Instruction Manual America - Page 16
    to the desired image with entering the chapter number, scene number, play time, etc. (P.79). ÑÑFunction panel 1 Touch [ ] on the left side of the screen. DVD VCD The functions of each key are as follows. [I] Stops playback. When touched twice, the disc is played from the beginning when you play
  • JVC KW-V840BT | Instruction Manual America - Page 17
    only) Change the audio output channel. Music CD/ Disc media Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • In this manual, "Music CD" will be referred to as the general CDs which include music tracks in. "Disc media" will be referred to
  • JVC KW-V840BT | Instruction Manual America - Page 18
    search Operation (Disc media only) You can search a file according to hierarchy. NOTE • For operations in the list screen, see List screen (P.14). 1 Touch [1]. hhFolder List screen appears. 2 Touch the desired folder. hhWhen you touch a folder its contents are displayed. 3 Touch desired item from
  • JVC KW-V840BT | Instruction Manual America - Page 19
    DVD Disc Menu Operation You can set up some items in the DVD-VIDEO disc menu. 1 Touch illustrated area during playback. hhMenu Control screen appears. 2 Perform desired operation as follows. Disc ■■Switches the picture angle Touch [Angle]. Each time you touch this key, picture angle is switched. *
  • JVC KW-V840BT | Instruction Manual America - Page 20
    larger than other modes. This is effective only when you are using Dolby Digital software. For language code, refer to DVD Language Codes (P.90). Sets the entered language and returns to the DVD Setting screen. NOTE • To set the DVD's original language for audio language, touch [Original]. 20
  • JVC KW-V840BT | Instruction Manual America - Page 21
    things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make calls, send and receive messages Unlock your iPhone. ÑÑOperation buttons and available Apps on the home screen of CarPlay You can use the Apps of the connected iPhone. The items
  • JVC KW-V840BT | Instruction Manual America - Page 22
    ] is set to [Mirroring] in the [User Interface] screen. (P.66) • If sound is output using Apple CarPlay when the Apple CarPlay screen is displayed, the source Android Auto, visit https:// www.android.com/auto/ and https://support. google.com/androidauto. Compatible Android devices You can use Android
  • JVC KW-V840BT | Instruction Manual America - Page 23
    [FNC] button. hhPopup menu appears. 2 Touch [DISP]. NOTE • This operation is available when [DISP Key] is set to [Mirroring] in the [User Interface] screen. (P.66) • If sound is output using Android Auto when the Android Auto screen is displayed, the source is switched to Android Auto. English 23
  • JVC KW-V840BT | Instruction Manual America - Page 24
    in the iPhone or Bluetooth device. To enter Pandora source, touch [Pandora] icon in the source selection screen. (P.11) Preparation • Install the latest version of the Pandora® application on your iPhone, Android or BlackBerry. iPhone: Search for "Pandora" in the Apple App Store to find and
  • JVC KW-V840BT | Instruction Manual America - Page 25
    list screen. Genre list screen 1 Touch [Create station from genre]. APPS-Android Auto™/Apple CarPlay About Pandora® iPhone or iPod touch • Install the legal for more information. • Because Pandora® is a third-party service, the specifications are subject to change without prior notice. Accordingly,
  • JVC KW-V840BT | Instruction Manual America - Page 26
    You can listen to the Spotify on this unit by controlling the application installed in the iPhone or Android. To enter Spotify source, touch [Spotify] icon in the source selection screen. (P.11) Preparation • Install the latest version of the Spotify application "Spotify" on your iPhone or Android
  • JVC KW-V840BT | Instruction Manual America - Page 27
    and search for "Spotify" to install. Note • Ensure you are logged in to your smartphone application. If you do not have an Spotify account, you can create one for free from your smartphone or at www.spotify.com. • Because Spotify is a third-party service, the specifications are subject to change
  • JVC KW-V840BT | Instruction Manual America - Page 28
    . ÑÑAvailable Apps You can use the following Apps on this unit. Install the Apps on your smartphone beforehand. WebLink™ WebLink™ enables you to DISP Key] is set to [Mirroring] in the [User Interface] screen. (P.66) • If sound is output using WebLink when the App screen is displayed, the source is
  • JVC KW-V840BT | Instruction Manual America - Page 29
    manual indicates a flash memory device. ●●About file system The file system should be the one of the following. • FAT16 • FAT32 • exFAT • NTFS USB NOTE • Install Most functions can be controlled from the source control screen and playback screen. Control screen 1 2 7 4 5 3 6 Open the
  • JVC KW-V840BT | Instruction Manual America - Page 30
    to display the function panel. Touch again to close the panel. Searches previous/next folder. 5 Content list • Touch on the right side of the screen to display the Content list. Touch again to close the list. • Displays the playing list. When you touch a track/file name on the list, playback
  • JVC KW-V840BT | Instruction Manual America - Page 31
    Touch [Link Search]. 2 Touch the desired tag type. You can select from artists, albums and genres. NOTE • For operations in the list screen, see List screen (P.14). ÑÑCategory search You can search a file by selecting category. 1 Touch [Category List]. 2 Select whether you search by audio files or
  • JVC KW-V840BT | Instruction Manual America - Page 32
    has been played by the iPod is played first. ÑÑConnect iPod/iPhone Wired connection Preparation • Connect an iPod/iPhone with the KS-U62 (optional accessory 2 Press the [FNC] button. hhPopup menu appears. 3 Touch [ ]. hhHOME screen appears. 4 Touch [ ]. 5 Touch [iPod]. (P.11) ●●To disconnect the
  • JVC KW-V840BT | Instruction Manual America - Page 33
    to fast forward or fast backward. • [DH] : Plays or pauses. • [ ] : Touch to attenuates/restores the sound. 4 Content list • Touch on the right side of the screen to display the Content list. Touch again to close the list. • Displays the playing list. When you touch a track/file name on the list
  • JVC KW-V840BT | Instruction Manual America - Page 34
    2 Touch the desired tag type. You can select from artists, albums, genres and composers. NOTE • For operations in the list screen, see List screen (P.14). ÑÑCategory search You can search a file by selecting category. 1 Touch [Category List]. 2 Touch the desired category. hhThe list corresponding
  • JVC KW-V840BT | Instruction Manual America - Page 35
    [AUTO2]: Tunes in stations in memory one after another. • [MANUAL]: Switches to the next frequency manually. Tuner 3 Operation keys • [E] [F] : Tunes in a station receiving station in memory. • Touch on the right side of the screen to display the Preset list. Touch again to close the list. 5 Function panel
  • JVC KW-V840BT | Instruction Manual America - Page 36
    by program type (P.37). [MONO] (FM only) Select the Monaural reception. 2 Touch [ ] on the left side of the screen. Touch [SSM]. 3 Touch [Yes]. hhAuto memory starts. ÑÑManual memory You can store the current receiving station in memory. 1 Select a station you wish to store in memory. 2 Touch [FM
  • JVC KW-V840BT | Instruction Manual America - Page 37
    (FM only) You can tune to a station with a specific program type when listening to FM. 1 Touch [ ] on the left side of the screen. Touch [PTY]. hhPTY Search screen appears. 2 Select a program type from the list. 3 Touch [Search]. You can search a station of the selected program type. English 37
  • JVC KW-V840BT | Instruction Manual America - Page 38
    to 50 kHz/9 kHz. NOTE • It is necessary to have Traffic Information function set to on in order to have the Traffic Information screen appear automatically. • The volume setting during reception of traffic information is automatically stored. The next time the traffic information is received, this
  • JVC KW-V840BT | Instruction Manual America - Page 39
    and Subscription are required. For more information, visit www.siriusxm.com. To enter SiriusXM source, touch [SiriusXM] icon in the source selection screen. (P.11) Activating subscription • Check your Radio ID. The SiriusXM Satellite Radio ID is required for activation and can be found by tuning
  • JVC KW-V840BT | Instruction Manual America - Page 40
    keys, see Function panel (P.40). 7 Artwork Display album artwork for most SiriusXM music channels ÑÑFunction panel 1 Touch [ ] on the left side of the screen. The functions of each key are as follows. [Direct Channel] Touch and enter the desired number. For details, see Direct search (P.41). [SETUP
  • JVC KW-V840BT | Instruction Manual America - Page 41
    channel. Preset select You can list and select memorized station or channel. To select from the preset list 1 Touch [ ] on the right side of the screen. Select a channel from the list. 2 Enter the channel number and touch [Enter]. NOTE • To clear the number you entered, touch [BS]. English 41
  • JVC KW-V840BT | Instruction Manual America - Page 42
    dynamic and can change often, allowing you to discover new channels. --You can set whether to be notified when the featured seasonal theme is updated. (P.50) 42 ■■[E] [F] Press to skip to the previous/next track. Press and hold to rewind or fast forward. (It will be cancelled automatically after
  • JVC KW-V840BT | Instruction Manual America - Page 43
    songs you don't want to hear. 1 Touch [ ] on the left side of the screen. Touch [TuneMix] to set ON or OFF. SiriusXM® TuneScan™ TuneScan™ is a feature that song. NOTE • To cancel TuneScan™, Touch on the left side of the screen. Touch [TuneScan]. • Touch and hold [TuneScan] to cancel TuneScan, the
  • JVC KW-V840BT | Instruction Manual America - Page 44
    to allow you to switch the current channel to the relevant channel. 1 When the broadcast of the registered content starts, an Alert Content List screen appears. 2 Touch [Traffic & Weather]. The report starts from the beginning. To stop and return to the previous channel, touch it again. Indicator
  • JVC KW-V840BT | Instruction Manual America - Page 45
    see SportsFlash™ setup (P.49). hhSiriusXM SETUP screen appears. See the following sections for each setting. • Set up the parental code (P.46) • Set up the Parental • Select the Featured Bands Update Messages (P.50) • Set up the TuneStart™ (P.50) • Reset to the default settings (P.50) English 45
  • JVC KW-V840BT | Instruction Manual America - Page 46
    number is set to "0000" as default. 2 Enter the current code number and touch [Enter]. hhParental Pass 1st entering screen appears. 3 Enter the new code number and touch [Enter]. hhParental Pass 2nd entering screen appears. 4 Enter the same code number as you input in step 3 and touch [Enter]. hhThe
  • JVC KW-V840BT | Instruction Manual America - Page 47
    • Touch [All-Channels] to display all the channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. 4 Touch each channel on the list and set to ON or OFF. [ON]: If you wish to set the lock. [OFF]: If you wish to
  • JVC KW-V840BT | Instruction Manual America - Page 48
    you want to set check or uncheck. ■■[þ All] Select all content. ■■[¨ All] Erases all check marks. 3 Touch [Delete] and then touch [YES] on the confirmation screen. NOTE • You can select þ for up to 30 Teams. 48
  • JVC KW-V840BT | Instruction Manual America - Page 49
    teams. ■■ [Priority] Sets the priority of a team to be posted. ■■ [Clear] Removes all teams that have been set. Touch [Clear]. When the confirmation screen appears, touch [YES]. NOTE • SportsFlash™ is available on SXV300 or later tuner models. • Up to 50 teams can be added. 4 Touch each team in
  • JVC KW-V840BT | Instruction Manual America - Page 50
    SETUP screen. The Featured Bands Update Messages is turned on or off. Default is "ON". ÑÑTuneStart™ 1 Touch [Tune Start] in the SiriusXM SETUP screen. The TuneStart is turned on or off. Default is "ON". ÑÑReset 1 Touch [SiriusXM Reset] in the SiriusXM SETUP screen. hhConfirmation screen appears
  • JVC KW-V840BT | Instruction Manual America - Page 51
    . ÑÑCamera Setup 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSETUP Menu screen appears. 4 Touch [Camera]. hhCamera screen appears. 5 Set each item as follows. ■■[Rear Camera Interruption] [ON ](Default): Displays the picture from the rear view
  • JVC KW-V840BT | Instruction Manual America - Page 52
    the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view (P.83) 2 Press the [FNC] button. hhPopup menu appears. 3 Touch [ ]. hhHOME screen appears. 4 Touch [ ]. 5 Select [AV-IN] as the source. (P.11) 6 Turn
  • JVC KW-V840BT | Instruction Manual America - Page 53
    about the Radar Detector. * * These ADS adapter features are displayed as the widget on the Home screen. (P.10) You can display these screens by touching the widget. NOTE • Displayable screens, button names, and screen names vary depending on the type of the connected iDataLink and the model of the
  • JVC KW-V840BT | Instruction Manual America - Page 54
    player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.5) (Audio/Video Remote Control Profile) Sound codec SBC, AAC NOTE • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. • However
  • JVC KW-V840BT | Instruction Manual America - Page 55
    apps in your smartphone over SPP. This message appears if the device supports BT audio (A2DP) or smartphone link (SPP). ●●SSP (Secure Simple Pairing of Bluetooth 2.1 or later) 1 Search the unit ("KW-V****"/ "KW-M****") from your smartphone/cell-phone. 2 Confirm the request both on the smartphone
  • JVC KW-V840BT | Instruction Manual America - Page 56
    appears if the device supports PBAP. Bluetooth Setup 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch connection icon appears on the screen. hhSETUP Menu screen appears. 4 Touch [Bluetooth]. hhBluetooth SETUP screen appears. See the following section
  • JVC KW-V840BT | Instruction Manual America - Page 57
    device name you want to connect. 2 Touch the device name to check. hhProfile select screen appears. NOTE • If the icon is lighted, it means that the unit will use App (SPP)] Set to interwork with an application installed in a smartphone or to use as an audio player. 4 Touch [Close]. English 57
  • JVC KW-V840BT | Instruction Manual America - Page 58
    Control ÑÑChange the PIN Code 1 Touch [PIN Code] in the Bluetooth SETUP screen. hhPIN Code Set screen appears. 2 Touch and hold [ ]. 3 Input the PIN Code. 4 Touch [SET]. ÑÑChange the device name 1 Touch [Device Name] in the Bluetooth SETUP screen. hhChange Device Name screen appears. 2 Touch and
  • JVC KW-V840BT | Instruction Manual America - Page 59
    (fast backward), H (pause), I (stop). * These items appear only when the audio player which supports AVRCP profile is connected. NOTE • The operation buttons, indications and information displayed on the screen differ depending on the connected device. • If the operation keys do not appear, operate
  • JVC KW-V840BT | Instruction Manual America - Page 60
    Call using call records 1 Touch [ ]. 2 Select the phone number from the list. hhHands Free screen appears. NOTE • If your mobile phone supports PBAP, you can display the phone book and call lists on the touch panel screen when the mobile phone is connected. --Phone book: up to 1000 entries --Up to
  • JVC KW-V840BT | Instruction Manual America - Page 61
    a non-accent character "u" . A character with an accent character in a sentence cannot be searched. 4 Select the person you want to call from the list. hhVoice Recognition screen appears. 2 Start speaking. NOTE • You can use voice recognition function by touching [ ] on the Hands Free
  • JVC KW-V840BT | Instruction Manual America - Page 62
    Bluetooth Control ÑÑReceive a call 1 Touch [ ] to answer a phone call or [ ] to reject an incoming call. NOTE • While monitoring the view camera, this screen does not appear even if a call comes in. To end call 1 While talking, touch [ ]. ÑÑOperations during a call ●●Adjust the volume of your voice
  • JVC KW-V840BT | Instruction Manual America - Page 63
    1 Touch [ ]. 2 Touch the name to check. ■■[Delete all] To delete all preset numbers, touch [Delete all] and then touch [OK] on the confirmation screen. 4 Select how to preset. ■■[Add number from phonebook] Select the number to preset by referring to "Call using the phonebook". See Call using the
  • JVC KW-V840BT | Instruction Manual America - Page 64
    function. 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSETUP Menu screen appears. 4 Touch [Bluetooth]. hhBluetooth SETUP screen appears. 5 Touch [TEL SETUP]. hhTEL SETUP screen appears. 6 Set each item as follows. ■■[Auto Response]* Sets an
  • JVC KW-V840BT | Instruction Manual America - Page 65
    / [Color] / [Tint] Adjusts each item. ■■ [Aspect] Select screen mode. [Full]: Changes the aspect ratio of video and displays fully on the screen. [Normal]: Displays with 4:3 ratio. [Auto]: DVD, VCD and disc (P.51) • Set up special (P.67) • Set up Bluetooth (P.56) • Set up security (P.8) English 65
  • JVC KW-V840BT | Instruction Manual America - Page 66
    the time zone. ■■[Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually. (P.66) ■■[DISP Key] Select the source screen displayed when on the popup menu screen is pressed. [Mirroring] (Default): Switches to the App screen from the connected iPod touch/ iPhone/Android device
  • JVC KW-V840BT | Instruction Manual America - Page 67
    Panel Adjust] on the User Interface screen. hhTouch Panel Adjust screen appears. 2 Follow the instruction on the screen and long touch the center of each [ ]. 2 1 NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset]. Special Setup You can setup
  • JVC KW-V840BT | Instruction Manual America - Page 68
    watching DVD video, etc. "ON" (Default)/ "OFF" ■■[Wallpaper Customize] Changing wallpaper image. (P.68) ■■[Viewing Angle] If it is hard to see the image on the screen even, adjust the viewing angle. The smaller the (negative) value, the more whitish the image on the
  • JVC KW-V840BT | Instruction Manual America - Page 69
    ] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSETUP screen appears. 4 Touch [AV]. Setting Up 3 Touch [Enter cannot select USB or iPod as the AV output source. • If you select Mirroring (WebLink), Apple CarPlay or Android Auto as the main source, you cannot
  • JVC KW-V840BT | Instruction Manual America - Page 70
    appears. 4 Touch [AV Off]. 5 Press the [FNC] (1) button and the [-] (2) button for 1 second at the same time. 2 1 hhSpeaker system select screen appears. 6 Select the crossover network mode. See the following section for each setting. • Set up speaker/ X'over (P.71) • Controlling equalizer
  • JVC KW-V840BT | Instruction Manual America - Page 71
    Front) You can set the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ [X`over] Displays the speaker crossover setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.72
  • JVC KW-V840BT | Instruction Manual America - Page 72
    Inversion]*3 Sets the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When subwoofer is selected on Speaker Select screen) *1 Only when "LPF FREQ"/"HPF FREQ" is set to a mode other than "Through" in [X`over]. *2 Only when "Tweeter" is set to "Small", "Medium
  • JVC KW-V840BT | Instruction Manual America - Page 73
    the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. ■■Gain level (dotted frame area) Adjust the gain level by to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. ■■[Bass EXT] (Bass Extend Settings) When turned on, the frequency lower than 62
  • JVC KW-V840BT | Instruction Manual America - Page 74
    1 Touch [Preset Select]. 2 Select EQ curve. 4 Touch [Audio]. hhAudio screen appears. 5 Touch [Volume Offset]. 6 Touch [+] or [ʵ] to adjust the hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSource selection screen appears. ■■ [Initialize] Returns to the initial settings
  • JVC KW-V840BT | Instruction Manual America - Page 75
    cannot select USB or iPod as the Rear Source. • If you select Mirroring (WebLink), Apple CarPlay or Android Auto as the Front Source, you cannot appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSource selection screen appears. 4 Touch [Audio]. hhAudio screen appears. 5 Touch [Sound Effect
  • JVC KW-V840BT | Instruction Manual America - Page 76
    more delay time, so that the sound from each speaker arrive a listener at the same time. 1 Touch [Listening Position] in the Position/ DTA screen. 2 Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), and [All]. Position DTA control You can fine
  • JVC KW-V840BT | Instruction Manual America - Page 77
    ÑÑFront Focus This is the function to focus the imaginary sound image in front of the selected seat. 1 Touch [Front Focus] in the Position/DTA screen. 2 Select a front focus position. For [Front All] and [All], select Priority L or R depending on which side you want to put the imaginary sound image
  • JVC KW-V840BT | Instruction Manual America - Page 78
    internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the
  • JVC KW-V840BT | Instruction Manual America - Page 79
    the volume. Lowers the volume by pressing the key once. Restores the previous volume by pressing the key twice. Switches the screen between the current source and the App screen from the connected iPod touch/ iPhone/Android. Selects the folder to be played. During tuner source, select FM/ AM band to
  • JVC KW-V840BT | Instruction Manual America - Page 80
    power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse. # CAUTION • Install this unit in the console of your vehicle. Do not touch the metal part of this unit
  • JVC KW-V840BT | Instruction Manual America - Page 81
    wiring harness connector to the unit. Connection/Installation 6) Install the unit in your car. 7) Reconnect the ¤ terminal of the battery. 8) Perform the Initial Setup. See Initial setup (P.7). Installing the unit 4 or 5 Car Bracket 4 or 5 NOTE • Make sure that the unit is installed securely
  • JVC KW-V840BT | Instruction Manual America - Page 82
    Connection/Installation ÑÑConnecting wires to terminals Fuse (15A) White White/Black Gray Gray/Black Speaker impedance: 4-8 Ω To front left speaker To front right speaker Connect to the vehicle's parking brake detection switch Accessory 1 harness. Light Green PRK SW (Parking sensor wire) (2
  • JVC KW-V840BT | Instruction Manual America - Page 83
    FM/AM antenna input 3 When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Rear Audio Preout (Left For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner. 5
  • JVC KW-V840BT | Instruction Manual America - Page 84
    Connection/Installation ÑÑConnecting a USB device Accessory 2 (Black) (1 m)[3] USB device[2] USB (Black A [2] Sold separately [3] Optional accessory [4] See Securing the USB extension cable (P.84). ÑÑSecuring the USB extension cable Secure the USB extension cable with insulating tape or the like
  • JVC KW-V840BT | Instruction Manual America - Page 85
    Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems the message on the screen. There is an error in the speaker wiring. Please check the and try inserting it again. Contact the JVC dealer if this indicator continues blinking or
  • JVC KW-V840BT | Instruction Manual America - Page 86
    Check Tuner A SiriusXM tuner is not connected to this unit. †† Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio. Subscription Updated - Press Return To Continue The SiriusXM subscription has been renewed. †† Pressing the Control knob will clear the message. SXM
  • JVC KW-V840BT | Instruction Manual America - Page 87
    kinds of media and files on this unit. ÑÑList of playable discs (KW-V840BT) Disc types / Standard DVD DVD Video DVD Audio DVD-VR DVD-R*1 DVD Playback is possible. r : Playback is partly possible. × : Playback is impossible. Support Remark v × × v • MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/
  • JVC KW-V840BT | Instruction Manual America - Page 88
    of which is covered with DRM cannot be played. • DSD sound is converted to PCM sound before playback. • The EmChinks tag of DSDIFF is not supported. • Although the audio files are complied with the standards listed above, the play may be impossible depending on the types or conditions of media or
  • JVC KW-V840BT | Instruction Manual America - Page 89
    in the World The DVD players are given a region code according to the country or area it is marketed, as shown in playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual. Prohibition Mark ■■Discs with limited period of use Do not leave
  • JVC KW-V840BT | Instruction Manual America - Page 90
    Irish gd Scots Gaelic gl Galician gn Guarani gu Gujarati ha Hausa he Hebrew hi Hindi hr Croatian hu Hungarian hy Armenian Code Language ia Interlingua ie Interlingue ik Inupiak id Indonesian is Icelandic it Italian ja Japanese jv Javanese ka Georgian kk Kazakh kl
  • JVC KW-V840BT | Instruction Manual America - Page 91
    section (KW-V840BT) D/A KW-M740BT) : 89 dB ■■Bluetooth section Technology : Bluetooth Ver.3.0 Frequency : 2.402 - 2.480 GHz Output Power : +4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Audio Codec : SBC/ AAC Profile (Multi Profile support
  • JVC KW-V840BT | Instruction Manual America - Page 92
    Appendix ■■FM tuner section Frequency Range (step) : 87.9 MHz - 107.9 MHz (200 kHz) Usable Sensitivity (S/N : 30 dB) : 9.3 dBf (0.8 μV/ 75 Ω) Quieting Sensitivity (S/N : 50 dB) : 15.2 dBf (1.6 μV/ 75 Ω) Frequency Response : 30 Hz - 15 kHz S/N Ratio (dB) : 75 dB (MONO) Selectivity (± 400 kHz) : Over
  • JVC KW-V840BT | Instruction Manual America - Page 93
    Installation Dimensions (W × H × D) : 178 × 100 × 155 mm 7 × 3-15/16 × 6-1/8 inch Operational Temperature Range : -10 °C - +60 °C Weight KW-V840BT : 2.1 kg (4.63 lbs) KW of such marks by JVC KENWOOD Corporation is under license use the trade names, trademarks, service marks, or product names of the
  • JVC KW-V840BT | Instruction Manual America - Page 94
    provided that the following conditions are met: --Redistributions of source code must retain the above copyright notice, this list of conditions DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  • JVC KW-V840BT | Instruction Manual America - Page 95
    OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, of source code must retain in the instruction manual. The installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation product safety. JVC KENWOOD Corporation 2967
  • JVC KW-V840BT | Instruction Manual America - Page 96
    levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person's body. • Contains Transmitter Module FCC ID: ZWY8811X • Contains Transmitter
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

B5A-2303-00 c
(K)
© 2018 JVC KENWOOD Corporation
MONITOR WITH DVD RECEIVER
KW-V840BT
MONITOR WITH RECEIVER
KW-M740BT
INSTRUCTION MANUAL
Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from