JVC KW-XG500 Instructions - Page 13

ENGLISH Listening to the satellite radio Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. See also page 17. • JVC SIRIUS radio DLP-Down Link Processor, for listening to the SIRIUS Satellite radio. • XMDirect™ Universal Tuner Box-Using a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening to the XM Satellite radio. • Refer also to the Instructions supplied with your SIRIUS Satellite radio or XM Satellite radio. GCI (Global Control Information) update • If channels are updated after subscription, updating starts automatically. "UPDATING" flashes and no sound can be heard. • Update takes a few minutes to complete. • During update, you cannot operate your satellite radio. Activate your SIRIUS subscription after connection 1 2 JVC DLP starts updating all the SIRIUS channels. Once completed, JVC DLP tunes in to the preset channel, CH184. 4 Contact SIRIUS on the internet at to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474). "SUB UPDT PRESS ANY KEY" scrolls on the display once subscription has been completed. Activate your XM subscription after connection • Only Channel 0, 1, and 247 are available before activation. 1 2 XMDirect™ Universal Tuner Box starts updating all the XM channels. "Channel 1" is tuned in automatically. 3 Check your XM Satellite radio ID labelled on the casing of the XMDirect™ Universal Tuner Box, or tune in to "Channel 0" (see page 14). 4 Contact XM Satellite radio on the internet at to activate your subscription, or you can call 1-800-XM-RADIO (1-800-967-2346). Once completed, the unit tunes in to one of the available channels (Channel 4 or higher). 3 Check your SIRIUS ID, see page 20. Continued on the next page EXTERNAL DEVICES 13