JVC LT17X475 Instructions - Page 12

ENGLISH Remote control buttons and function Adjust the volume Press the VOLUME buttons to adjust the volume. The volume indicator appears and the volume changes as you press the VOLUME buttons. Muting the sound Press the muting button to turn off the sound. Pressing the muting button again restores the previous volume level. Displaying the source information You can display the source information on the screen. Press the DISPLAY button to display the source information. Pressing the DISPLAY button changes the display as follows: 01 STEREO Watch images from external equipment or TV VIDEO-1 No Display Use the INPUT button: Press the INPUT button to choose an VIDEO terminal. TV mode Last Programme number EXT modes VIDEO-1 EXT Signal source • The source information switched by DISPLAY button. • The source type : TV/VIDEO-1/VIDEO-2/PC PC PC VIDEO-2 In the PC mode: If following message appears, the power lamp blinks in amber and the TV goes in to reduced power mode. - "NO SIGNAL" - "CABLE NO INSERT" - "OUT OF RANGE" See "Troubleshooting" on page 25 for detials of this messages. MTS (Muti-Channel Television Sound) MTS technology allows severial audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program(SAP). Press MTS button to switch STEREO/SAP/MONO. • Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only. • Choose the mono setting to reduce excessive noise on a certain channel or broadcast. • Selecting SAP will allow you to hear an alternative soundtrack, if one is available. • MTS unavailable if your television's input source is in VIDEO-1, VIDEO-2. 11