JVC LT37E488 User Guide - Page 38

Initial Setup Auto Shut Off This function automatically shuts off your TV when there is no signal from the channel the TV is on for 10 minutes. π† √® π† √® Press the MENU button To "Initial Setup" To enter To "Auto Shut Off" To turn "On" or "Off" Initial Setup Auto Shut Off Software Version Power Indicator Quick Start-up 2/2 On Low On Press the MENU button when finished • If the channel that you have on does not receive a Select BACK Operate Back MENU Exit signal for more than one minute, the blinking text "No Program or Weak Signal Auto shut off in 9 min." appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off. Software Version You can confirm the Software Version. Press the MENU button π† √® π† √® To "Initial Setup" To enter To "Software Version" To enter Press the OK button to close Press the MENU button when finished Initial Setup Auto Shut Off Software Version Power Indicator Quick Start-up 2/2 On Low On Select BACK Operate Back MENU Exit Power Indicator Power indicator allows you to adjust the brightness of the power indicator Press the MENU button π† √® π† √® To "Initial Setup" To enter To "Power Indicator" To turn "High", "Low", "Off" Initial Setup Previous Auto Shut Off Software Version Power Indicator Quick Start-up 2/2 On Low On Press the MENU button when finished Notes : • When Off is selected : The LED disappears if you have a TV signal. The LED is lit as "Low" when there is no TV signal. Select BACK Operate Back MENU Exit • When the On Timer turns On, the LED is lit as "Low" when you turn the power off. • If you set a timer on the TV, the power indicator will light even if the TV is on stand by. 38