JVC LT40X887 Instructions
JVC LT40X887 - 40" LCD TV Manual
 |
UPC - 046838024801
View all JVC LT40X887 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC LT40X887 manual content summary:
- JVC LT40X887 | Instructions - Page 1
LCD Flat Television Users Guide For Models: LT-32X667 LT-32X787 LT-32X887 LT-37X787 LT-37X887 LT-37XM57 LT-40X667 LT-40X787 LT-40X887 Illustration of LT-32X787 and RM-C18G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the - JVC LT40X887 | Instructions - Page 2
event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don't use this TV set for a long period of time, be sure to disconnect both the power plug - JVC LT40X887 | Instructions - Page 3
JVC has determined that this product or product model meets the "ENERGY STAR®" guidelines for energy efficiency. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions outlet. 10) Protect the power cord from being walked - JVC LT40X887 | Instructions - Page 4
servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power . When installing this TV, distance recommendations must with the instructions, may television reception, which can be determined by turning the equipment off and on, the user - JVC LT40X887 | Instructions - Page 5
services (do not have a separate cable box) and plan to use their JVC TV remote control to select channels. Once you run the Auto Tuner Setup (which detects and programs all the channels your TV note that this is not a malfunction of your television. If you want to sequentially scan those channels - JVC LT40X887 | Instructions - Page 6
Warnings (Continued...) Caring for the Cabinet Normally, light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid - JVC LT40X887 | Instructions - Page 7
Ratios 70 TV/CATV Slide Switch 72 VCR/DVD Slide Switch 72 VCR Buttons 72 DVD Buttons 72 Light 72 D/A (Digital/Analog 73 Sub Channel 73 Guide 73 OSD Information 74 Weak Signal 74 No Program 74 Invalid Signal 74 Troubleshooting 75 Specifications 77 Warranty 78 Authorized Service Center - JVC LT40X887 | Instructions - Page 8
for your purchase of a JVC LCD Flat Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: 1 Television 1 Remote Control TV CATV VCR DVD POWER ASPECT MULTI SCREEN - JVC LT40X887 | Instructions - Page 9
Quick Setup TV Models Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear - JVC LT40X887 | Instructions - Page 10
CH VCR CHANNEL VCR DVD PREV NEXT POWER TV VCR REW PLAY FF REC STOP PAUSE OPEN CLOSE STILL PAUSE RM-C18G RM-C18G Notes: • For information on remote control buttons, see pages 62 - 73. • SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an ATSC antenna or - JVC LT40X887 | Instructions - Page 11
and are used with JVC's onscreen menu system. To use the onscreen menus, press the MENU button. MUTING CH GUIDE VOL OK VOL MENU BACK CH VCR CHANNEL VCR DVD Basic Operation Turn the television on and off by pressing the POWER button at the top right corner of the remote. If this is the - JVC LT40X887 | Instructions - Page 12
nearest power outlet and turn on the TV. • If you follow these diagrams and the television does not work properly, contact your local cable operator. • To connect a DVD player, see VCR Connection. A DVD player is optional • If you have a satellite television system, refer to the satellite TV manual - JVC LT40X887 | Instructions - Page 13
the screws with your fingers. LT-40X887, LT-40X787 LT-40X667 LT-37X887, LT-37X787 LT-37XM57 LT-32X887, LT-32X787, LT-32X667 Remove the terminal cover There . When replacing the cover, place the side of the cover against the TV and insert the hooks. Note: • Leave the terminal cover off if they - JVC LT40X887 | Instructions - Page 14
most common colors for DVD cables. Some models may vary colors. Please consult the user's manual for your DVD player for more information. VIDEO OVER R - AUDIO - L R INPUT INPUT 1 DIO Coaxial Cable (Attachment) TV Rear Panel Green Blue Red Y PB PR OUT AUDIO OUT R L DVD Player (OPTIONAL - JVC LT40X887 | Instructions - Page 15
R - AUDIO - L Y Pr Pb S-VIDEO VIDEO OVER R - AUDIO - L R INPUT INPUT 1 DIO Quick Setup Cable or Antenna Output IN OUT OUT Two-Way Splitter Coaxial Cable (Attachment) TV Rear Panel Green Blue Red Y PB PR OUT AUDIO OUT R L DVD Player (OPTIONAL) 15 - JVC LT40X887 | Instructions - Page 16
it to the LEFT AUDIO IN on the back of the TV. Headphone Connection You can connect a pair of headphones to the television using the headphone jack located on the side of the television. 1) Plug a headphone jack into the headphone jack on the television's side panel. POWER TV Side Panel 16 - JVC LT40X887 | Instructions - Page 17
's manual for more information. • You can use AUDIO OUTPUT for your home theater system. • You can not output audio using the AUDIO OUTPUT under the following conditions: 1) When you have digital sound from an HDMI device connected to the HDMI 1 or HDMI 2 connection on the back of your TV. (See - JVC LT40X887 | Instructions - Page 18
AV Receiver's PR MONITOR OUT, into the Pr VIDEO INPUT-1 on the back of your television. Notes: • This function does not apply to TV Model LT-32X667. • Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other devices like a DVD player. • Use your - JVC LT40X887 | Instructions - Page 19
HDMI 1 TV Rear Panel R AUDIO INPUT L S-VIDEO VIDEO REC OUT HDMI to DVI Cable After the connections have been made, tighten the screw to secure the cables. 1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to the DIGITAL-IN on the back of your television - JVC LT40X887 | Instructions - Page 20
first industry supported, uncompressed, all digital audio/video interface. HDMI provides and interface between any audio/video source, such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a digital television (DTV). TV Rear Panel HDMI Compatible Device DIGITAL - JVC LT40X887 | Instructions - Page 21
cable from underneath the television to the back of the amplifier. Notes: • This terminal can only output digital audio. • In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in the Digital Setup Menu. See page 54. • Refer to your owners manual on using your - JVC LT40X887 | Instructions - Page 22
screen. Use a commercially available D-SUB cable to connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. computer's audio output terminal. TV Rear Panel PC IN (D-SUB) Y Pr Pb VIDEO R - AUDIO - L S-VIDEO Notes: • Refer to your computer manual for a detailed explanation of - JVC LT40X887 | Instructions - Page 23
supported. When a picture is not displayed With some computers, some problems can be solved by changing the settings. Check the computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60 Hz, can not be used with this TV. Refer to the computer's instruction manual - JVC LT40X887 | Instructions - Page 24
the TV's clock to the correct time so your timer functions will work properly. You can choose "AUTO" or "MANUAL" your television. Notes: • The interactive plug-in menu setting does not appear if your TV has After the "JVC INTERACTIVE PLUG IN MENU" has been displayed, the TV automatically switches to - JVC LT40X887 | Instructions - Page 25
is set to AUTO, the Daylight Savings Time feature automatically adjusts your TV's clock for Daylight Savings. The clock will move power interruption. You must set the clock before operating any timer functions. Manual Clock Set To set your clock manually (without using the XDS signal), choose MANUAL - JVC LT40X887 | Instructions - Page 26
Tuner Setup In auto tuner setup, the TV automatically scans through all available channels, memorizing your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing - JVC LT40X887 | Instructions - Page 27
to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The - JVC LT40X887 | Instructions - Page 28
remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV Replay 024, 023 Jensen 003 JVC 003, 004, 005, 000, - JVC LT40X887 | Instructions - Page 29
DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV" and the - JVC LT40X887 | Instructions - Page 30
or DVD POWER button, and see if the VCR or DVD responds. 4) If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control - JVC LT40X887 | Instructions - Page 31
Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most one currently selected. If you use the Menu button on the TV's side panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT will appear - JVC LT40X887 | Instructions - Page 32
√ ® to select an option from the highlighted feature. Pressing MENU on the remote control will close the onscreen menu system and return you to normal television viewing. Each menu and its features will be discussed in the following pages of this guide. Notes: • If you do not press any buttons - JVC LT40X887 | Instructions - Page 33
V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON SOUND ADJUST PREVIOUS TURN ON VOLUME 10 VOLUME LIMIT 40 CLOCK / TIMERS PREVIOUS SET CLOCK ON / OFF the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu between INITIAL - JVC LT40X887 | Instructions - Page 34
Onscreen Menus Auto Tuner Setup The auto tuner setup function is described on page 26 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. π† √® √® Press the MENU button To AUTO TUNER SETUP To operate To choose CABLE or AIR Press the OK button - JVC LT40X887 | Instructions - Page 35
Onscreen Menus Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the - JVC LT40X887 | Instructions - Page 36
Notes: • You can use characters for: Alphabet, numbers, marks and spaces. • It is possible to set the maximum of 40 channel labels. • If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will appear. You can block access to a channel by activating the channel lock. Press the - JVC LT40X887 | Instructions - Page 37
based on specifications designed for the United States and therefore may not work properly in Canada. You can customize the V-Chip settings of your television to rating settings to operate) To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RATINGS (see following pages for descriptions of each - JVC LT40X887 | Instructions - Page 38
which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed Public Service Announcements • Sports • Some Commercials • Locally Originated Programming • Political Programs • Religious Programs • Weather Note: • TV programs - JVC LT40X887 | Instructions - Page 39
for adults and may be unsuitable for anyone under 17 years of age. TV MA programs may have extensive V, S, L, or D. Viewing Guidelines In addition to the ratings categories explained above, information on specific kinds of content are also supplied with the V-Chip rating. These types of content - JVC LT40X887 | Instructions - Page 40
TV RATINGS To operate V-CHIP V-CHIP SET US TV Line up the cursor in the column (TV PG, TV feature on or off. An item is locked if the icon appears instead of a "-". For example. To block viewing of all TV the TV 14 TV RATINGS TV TV TV TV TV TV MA 14 PG G Y7 Y V/FV S L D SELECT OK OPERATE MENU EXIT - JVC LT40X887 | Instructions - Page 41
may contain all types of programming including children's programming, foreign programs, or adult material. ❒ G - General Audience In the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age - JVC LT40X887 | Instructions - Page 42
Notes: • If you want to change the setup, move the cursor to the column and change the lock icon to "-" by pressing OK again. • For instructions on "SET CANADIAN RATINGS FRE (in French)", please see page 42 in the French side of this - JVC LT40X887 | Instructions - Page 43
V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of "0000". You may change is entered (see above for information on setting your lock code). Notes: • After a power interruption you must reset the lock code. • Write your lock code number down and keep - JVC LT40X887 | Instructions - Page 44
Onscreen Menus Language The language function is described on page 24 as the interactive plug-in menu. If you need to choose the language again, follow the steps below. π† √® Press the Menu button To LANGUAGE To choose a language: ENG. (English), FRAN. (French) or ESP. (Spanish) Press the MENU - JVC LT40X887 | Instructions - Page 45
form. Your television can access and display this information using the closed caption feature. To activate the closed caption feature, follow the To enter To select Auto To Set Preview Closed Caption Sample Type Service Appearance AUTO 1 Cancel Select Set BACK Operate Back MENU Exit - JVC LT40X887 | Instructions - Page 46
Press the MENU button π† √® π† √® π† √® π† √® √® π† √® π† √® To CLOSED CAPTION To enter To Type To select Auto, Advanced or Basic To Service To select 1, 2, 3, 4, 5 or 6 To Appearance To enter To select Manual To Font To enter To select Font Size or Font Style To select the setting you like Font - JVC LT40X887 | Instructions - Page 47
A SIGNAL AUTO SHUT OFF IN 9 MIN." appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off. NEXT PAGE SELECT OPERATE (3/5) MENU EXIT XDS ID XDS ID Display provides a channel's call letters, the network's name, and even a program - JVC LT40X887 | Instructions - Page 48
OFF ON LOW (2/5) MENU EXIT • Use the remote control. • Press the MENU button on the side of the TV for more than 3 seconds. In this case, the OSD for FRONT PANEL LOCK will appear. Note: • To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will remain ON. 48 - JVC LT40X887 | Instructions - Page 49
LT-32X667 does not have the V1 Smart Input feature. This feature is used if you have connected an AV Receiver to your television. By turning this feature on, your television you do not have an AV Receiver connected to your television, turn this feature OFF. • Some AV Receivers may not work with this - JVC LT40X887 | Instructions - Page 50
to save Press the MENU button when finished INITIAL SETUP PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE VIDEO INPUT LABEL VIDEO-1 VIDEO-2 VIDEO-3 DIGITAL-IN1 DIGITAL-IN2 ON OFF ON LOW (2/5) MENU EXIT VCR DVD SAT - JVC LT40X887 | Instructions - Page 51
• When OFF is selected : The LED disappears if you have a TV signal. The LED is lit as "LOW" when there is no TV signal. INITIAL SETUP PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON LOW (2/5) MENU EXIT - JVC LT40X887 | Instructions - Page 52
in1 Audio This feature is used if you have a DTV or HDMI compatible component connected to your TV. π† √® HDMI component's instruction manual for more information. • When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically, depending on the audio input from the HDMI - JVC LT40X887 | Instructions - Page 53
Onscreen Menus Digital Setup Use this function when you are receiving a digital broadcast. Press the MENU button Digital Setup π† √® To DIGITAL SETUP To enter The onscreen will appear Antenna Level Digital Sound Software Version PCM Notes: Software Update • Software Update will only - JVC LT40X887 | Instructions - Page 54
Onscreen Menus Digital Sound You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital - JVC LT40X887 | Instructions - Page 55
television. TINT Tint allows you to adjust the levels of red and green in your TV picture. COLOR The color function lets you make all the colors in the TV can adjust the overall brightness of the TV picture with the Bright control. DETAIL The Detail feature adjusts the level of fine detail displayed - JVC LT40X887 | Instructions - Page 56
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. π† √® π† Press the MENU button To COLOR MANAGEMENT To enter To select the mode "ON" or "OFF" COLOR MANAGEMENT ON OFF Press the MENU button when finished Dynamic Gamma JVC's Dynamic - JVC LT40X887 | Instructions - Page 57
Note: • When you are receiving digital channels, block noise removal will have no effect. Smart Sensor This function automatically adjusts the brightness on your TV according to the amount of light in the room. π† √® π† Press the MENU button To SMART SENSOR To enter To select ON or OFF SMART - JVC LT40X887 | Instructions - Page 58
Onscreen Menus Sensor Effect With Sensor Effect ON, a "leaf" icon will appear on your TV screen when Smart Sensor brightness adjustment occurs. PICTURE ADJUST π† √® π† Press the MENU button To SENSOR EFFECT To enter To select ON or OFF PREVIOUS DIGITAL - JVC LT40X887 | Instructions - Page 59
you to change and adjust the sound on your television. BASS - You can increase or decrease the level of low-frequency sound in the TV's audio with the bass adjustment. TREBLE - Use treble to adjust the level of high-frequency sound in your TV's audio. BALANCE - Adjust the level of sound between the - JVC LT40X887 | Instructions - Page 60
manually, choose MANUAL by feature automatically adjusts your TV 's clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October. • You will have to reset the clock after a power - JVC LT40X887 | Instructions - Page 61
you program your television to turn itself enter (begins with ON TIME) To set the hour (AM/PM) you want the TV to turn on ON/OFF TIMER ON TIME OFF TIME CHANNEL ON VOLUME MODE ON/OFF timer to work, the clock must be set. • After a power interruption, the timer settings must be reset. • The digital - JVC LT40X887 | Instructions - Page 62
(or input). To turn split-screen off and return to normal television viewing, press SPLIT again or press the BACK button. 07 V-1 MAIN SCREEN PICTURE SPLIT SCREEN PICTURE Notes: • If the signal that you are watching is coming from the HDMI input, you cannot enter the SWAP or INDEX mode. • Main - JVC LT40X887 | Instructions - Page 63
press of SELECT will shift the channel. Menu The MENU button allows you to access JVC's onscreen menu system. Press MENU to activate the onscreen menu system. • See individual topics like "Sound Adjust" for specific information on using menus. OK This button confirms your selection when you are in - JVC LT40X887 | Instructions - Page 64
Button Functions Power Turns the TV on or off. Press the POWER button Note: • After turning the power on, you can not turn the power off for about one minute. Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel. For example, to move to - JVC LT40X887 | Instructions - Page 65
regulated sound level. MaxxBass - Emphasizes the bass sound (LT-40X887, LT-40X787, LT-40X667, LT-37X887, LT-37X787 and LT-37XM57) HYPER BASS - Increases bass levels, giving a richer, deeper bass. (LT-32X887, LT-32X787 and LT-32X667) π† √® Press the SOUND button To select A.H.S.+, A.T.C., SMART - JVC LT40X887 | Instructions - Page 66
on the side of the TV instead of the remote control. It appears between INITIAL an SD signal. Natural Cinema Natural cinema corrects the problem of blurred edges which may occur when viewing a at 24 frames-per-second, is broadcast at the television rate of 30 frames-per-second. Press the NATURAL - JVC LT40X887 | Instructions - Page 67
can change the language by pressing the ML/MTS button. • Keep the TV in stereo mode to get the best sound quality. The sound will work in you to hear an alternative soundtrack, if one is available. • MTS unavailable if your television's Input source is in input 1, 2 or 3 mode, as described on page - JVC LT40X887 | Instructions - Page 68
used. CLOSED CAPTION OFF SMART CAPTION ON Channel +/- Use these buttons to move up or down all the available channels your TV is able to receive. Volume +/- Use these buttons to raise or lower the TV's volume level. The maximum is the level you set in Volume Limit. See page 59. 68 - JVC LT40X887 | Instructions - Page 69
Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. π† Press the FAVORITE button The favorite channel list will appear. To select the channel you want to watch Press the - JVC LT40X887 | Instructions - Page 70
Button Functions Aspect This feature will help you adjust the picture you are watching to give you the best possible picture quality. Aspect Ratios PANORAMA - With this ratio a normal 4:3 aspect - JVC LT40X887 | Instructions - Page 71
by using the MENU button on the side of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST screen 16:9 signal from your HDMI device, the aspect mode will turn to FULL automatically. If the television receives a 4:3 signal from your HDMI device when you are - JVC LT40X887 | Instructions - Page 72
fast-forward, stop, pause, channel scan, TV/VCR, power on and power off. Move the selector switch to VCR to operate. • The remote is preset with the code 000 to control JVC-brand VCR's. For any other manufacturer's brand VCR, please see the code chart and instructions on page 28. DVD Buttons You can - JVC LT40X887 | Instructions - Page 73
press the OK button. Guide You can view the program from the GUIDE. Notes: • The GUIDE function will only work when you are receiving digital programming only. • The GUIDE will not show the correct time and date if you have not performed the set clock function on your television. See page 60. 73 - JVC LT40X887 | Instructions - Page 74
receive or no signal is being detected for that channel. Weak Signal 15 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function - JVC LT40X887 | Instructions - Page 75
Troubleshooting Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television. PROBLEMS There is no power CHECK • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a - JVC LT40X887 | Instructions - Page 76
Troubleshooting PROBLEMS Static electricity CHECK • It is normal to feel static electricity if you brush or touch the screen. You hear occasional crackling sounds It does not operate correctly • It is normal for the TV to make crackling sounds when first turned on or off. Unless the sound or - JVC LT40X887 | Instructions - Page 77
Specifications Model Type Reception Format Reception Range Power Source Power Consumption Screen Size Audio Output Speakers Dimensions (inch/cm) W X H X D Weight (lbs / kg) Accessories LT-32X887 LT-32X787 LT-32X667 LT-37X887 LT-37X787 LT-37XM57 LCD Flat Television LT-40X887 LT-40X787 LT-40X667 - JVC LT40X887 | Instructions - Page 78
78 - JVC LT40X887 | Instructions - Page 79
79 - JVC LT40X887 | Instructions - Page 80
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this
guide.
Keep this user’s guide in a convenient place for future reference.
Keep the carton
and original packaging for future use.
LCT2104-001B-A
0406TNH-II-IM
Model Number:
Serial Number:
Illustration of LT-32X787 and RM-C18G
For Models:
LT-32X667
LT-32X787
LT-32X887
LT-37X787
LT-37X887
LT-37XM57
LT-40X667
LT-40X787
LT-40X887
LCD Flat Television Users Guide