Jabra 6430-17-20-205 User Manual - Page 34

english 5. Place the headset close to the USB Bluetooth® Adapter and wait for a few seconds. When pairing is successful, you will see the following indicators: - On the adapter: the LED flashes blue quickly 5 times and turns off. - On the headset: the LED flashes blue 5 times and then turns off. 6. Your headset and USB Bluetooth® Adapter are now paired and connected. Figure 20: Jabra GO headset paired with both a mobile phone and the Jabra LINK 350 USB Bluetooth® Adapter 9.4 Jabra LINK 350 USB Bluetooth® Adapter Visual Indicators The Jabra LINK 350 USB Bluetooth® Adapter includes a pair of closely spaced LEDs, which light in various colors and patterns to indicate the status of the adapter and its connections. These are summarized in the table below. Adapter Status LED Signal Connected and ready for use, softphone is current target Constant green Connected and ready for use, softphone is not current target Constant yellow Paired but not connected Slow-flashing green Pairing mode Constant blue Pairing succeeded Quintuple (5x) blue flash (displays once) On a call or audio streaming Moderate blue flash Ringing Triple blue flash Muted Constant red Table 7: Visual signals of the Jabra LINK 350 USB Bluetooth® Adapter and their meanings Jabra GO 6430 User manual 34