Jabra BT250v User Manual - Page 5
English - pairing
UPC - 607421733328
View all Jabra BT250v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English Status indicators What you see Flashes every second Flashes every 3 seconds What you hear Quick series of 2 tones - low to high pitch (when active mode starts) Quick series of 2 tones - high to low pitch (when standby mode starts) 3 flashes every second 3 beeps every 30 seconds 3 flashes every 3 seconds 3 beeps every 5 minutes * Depending on phone type and usage. Status Active Mode⁵ • Call in progress • Up to 7 hours of talk-time* Standby Mode⁶ • Waiting for call • Up to 200 hours of standby time* Low Battery (in active mode) • 3 - 5 minutes of talk time left Low Battery (in standby mode) • 3 - 5 minutes of talk time left IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when turning the headset on or else it may go into pairing mode, and the blue indicator light will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat process for turning the headset on. 7 Choosing wearing preference Jabra BT250v is ready to wear on the right ear. If you prefer the left, gently rotate the MiniGel 180°. For optimal performance, wear Jabra BT250v and your Bluetooth phone on the same side of your body. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone. Fig. 4 6 8 Making a call If Jabra BT250v is off, turn it on now (see Turning headset on/off section). Using phone's keypad 1. Dial number on keypad. 2. Press phone's "send" key. Using voice-activated dialing (after you've set up voice tags on your phone) 1. Press and release once. You'll hear 1 short beep while doing this. 2. You'll then hear the voice-activation tone; say the name of the person you wish to call. NOTE: Record voice tag from headset for better reception. 9 Ending a call • Press and release once OR • End call from phone's keypad 10 Answering a call • After you hear the ring tone, press and release once OR • Answer the call with your phone's keypad. You may then need to transfer the call to the headset by pressing and releasing once (depending on your phone) 11 Call-waiting* • (Recommended) Use standard method from your phone's keypad which typically involves pressing the "send" button OR • Press and release once to answer the incoming call and toggle between calls (some phones do not support this headset feature) 7 English