Jabra EXTREME2 User manual - Page 13

english LISTENING TO MUSIC USING THE JABRA EXTREME2 Jabra EXTREME2 is capable of streaming music over Bluetooth® - either from a mobile phone or any other Bluetooth® device supporting A2DP. Once you have paired your Jabra EXTREME2 with your mobile phone or with a Bluetooth® music player, use your phone or music player to play, pause, stop, skip, forward and backward. When you receive a call, the music will automatically be suspended and you will be able to answer or reject a call through the headset. Once you end a call, the music should recommence. On some phones and music devices you may have to press 'play' to start the music again. TROUBLESHOOTING & FAQ I hear crackling noises - Bluetooth® is a radio technology, which means it is sensitive to objects between the headset and the connected device. It is designed for the headset and the connected device to be used within 10 meters (33 feet) of each other, with no major objects in the way (walls, etc.). I cannot hear anything in my headset - Increase the volume in the headset. - Ensure that the headset is paired to a device that is playing. - Make sure your phone is connected to the headset by tapping the Answer/End button. I am having pairing problems - You may have deleted your headset pairing connection in your mobile phone. Follow the pairing instructions. I want to reset the headset - It is possible to reset and test the headset by 'pressing and holding' all three buttoms at the same time. The red, blue and green light will light up in a white light. In this mode, the pairing list is reset, and you can test if the headset works as you will be able to hear audio in the speaker from the microphone. - The headset will automatically turn off after approx. 10 seconds. The next time you power on, the headset will go into pairing mode as the first time you powered your new EXTREME2 on. Jabra EXTREME2 12