Jabra GN8210 User Guide - Page 2

4

5

2.1 GN 8210

– What’s in the box

• GN 8210 amplifier with headset

stand

• Power adapter

• Telephone connection cord

• Quick Disconnect connector (to

connect headset’s cord)

Note:

The telephone and headset are not

included in the GN 8210 box.

3. Setting up the GN 8210

To set up the GN 8210, first complete the assembly (3.1), then adjust for clear dial

tone (3.2) and transmit volume (3.3), and finally choose the audio mode (3.4).

3.1 Assembly

To connect the GN 8210 to your telephone, com-

plete the following:

1. Disconnect the handset cord from the tele-

phone’s handset socket, and connect it to the

handset socket (J) on the GN 8210.

2.

Connect

the telephone connection cord

to the

telephone’s handset socket.

Note:

The telephone connection cord is already

connected to the GN 8210’s telephone socket

(K) from factory.

3.

Connect the power adapter to the power

adapter socket (L) at the back of the ampli-

fier, and then connect it to a power socket.

The amplifier indicates power connection

and functioning status with 2 seconds of

rapid flashing on the mute switch (F) and

on-line indicator (A).

4.

Connect your headset to the headset con-

nection cord, using the Quick Disconnect

connector.

5.

(Optional)

Insert the headsetstand to the back of the

amplifier by pressing it in.

1558-979_RevA_20-06-2004_10sprog.indd 4-5

1558-979_RevA_20-06-2004_10sprog.indd

4-5

21-06-2004 11:29:10

21-06-2004

11:29:10

Jabra GN8210 User Guide - Page 2

GN 8210, Setting up the GN 8210 - headset

Page 2 highlights