Jensen VM8022 Operation Manual - Page 7
bridge outputs for use with two
UPC - 043258304025
View all Jensen VM8022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
VM8022 WIRING Parking NOTE: The amplifier in this radio is only designed for use with four speakers. Never combine (bridge) outputs for use with two speakers. Never ground negative speaker leads to chassis ground. Failure to wire exactly as shown may cause electrical damage to the radio. Ground Connect to ground terminal or clean, unpainted part of chassis. Black NaSimpOnpeoTeamEdk:ieanOrnascnlewliymiletcphsoesnadntlahoenaaccndtes4pooef ha4kmoeshrsmws.ithsounroCcteowntohnraektciitfsttoahliwsbaawtytierserlyiiMvsoeenr.mo1Tt2hocervoyorn/alBntdepaiocotttweewrediylr.l could damage the unit. Yellow Fuse (15A) Power Antenna Connect to power antenna or amplifier. If not used, tape bare end of wire. Blue Accessory/Ignition Connect to existing radio wire or radio fuse. Red White/Black Stripe White Gray/Black Stripe FRONT SP REAR SP Gray Green/Black Stripe Green Purple/Black Stripe Purple Left Speaker (Front) Right Speaker (Front) Left Speaker (Rear) 3 Right Speaker (Rear) (Blue) (Yellow) (Yellow) A/V Media Adapter Cable IMPORTANT! The pink parking wire MUST be connected to the switched side of the parking break circuit (the part that becomes grounded when the brake is applied).