Kenmore 4156 Use and Care Guide - Page 19
UsingThe Dispenser - rating
View all Kenmore 4156 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
19 UsingThe Dispenser Your automatic ice & water dispenser includes a control panel, a drinking glass bay, and two push-paddles for turning on the ice and water supplies. Using the dispenser control panel is necessary for the ice dispenser water dispenser. The control panel also includes options for lighting, monitoring, and increasing the rates of ice making and freezing. but not the filter Dispensing Ice To operate the control the ice dispenser (O), panel. Press a drinking --, press an option for crushed or cubed ice on glass against the dispensing paddle (as far up as possible to catch all the ice). To stop, pull the glass away from the dispensing paddle. See details for operating the dispenser controls below. _C_ V FHITEREB I_E ANO WAT_ V WATER Dispensing Water To operate the water dispenser (I_1), press a drinking glass against the dispensing paddle. To stop dispensing water, pull the glass away from the dispensing paddle. The dispensed water is not cold. For colder water, first add crushed ice or cubes to your drinking glass. Drip Tray A drip tray located at the base of the dispenser bay catches small spills and allows them to evaporate. This drip tray is removable for easy cleaning. 0 PolarFreeze RapidIce _) Cube 0 Crush Light (_ Filter Reset (& StatusLight) _Lock Guide To Dispenser Controls Press and hold touchpad for 3-5 seconds to activate faster rate for freezing food (preserving freshness). Light displays green. Press and hold touchpad for 3-5 seconds again to deactivate. Press and hold touchpad for 3-5 seconds to increase ice production for special occasions, such as parties. Light displays green. Press and hold touchpad for 3-5 seconds again to deactivate. Press touchpad to get cubed ice. Light displays green. Press glass against ice dispensing paddle, holding high up to catch all ice. Press touchpad to get crushed ice. Light displays green. Press glass against ice dispensing paddle, holding high up to catch all ice. Press touchpad to turn on dispenser light. Light displays green. Press touchpad again to turn off dispenser light. Dispenser light also turns on automatically when ice and/or water is dispensed. Light displays in one of three possible colors each time the dispenser is used to show status of water filter: Green Water filter does not need changing. Amber Water filter is about 80 percent used. Please order a new one. Red Water filter is 100 percent used. Please change as soon as possible. After replacing the water filter, reset the filter status by pressing and holding touchpad for 10-15 seconds. The dispenser can be locked to prevent unwanted use. To lock, press and hold touchpad for 3-5 seconds. Light displays red. To unlock, press and hold touchpad for 3-5 seconds until light goes out. Pleasedo not pour excesswater and iceinto the driptray. It does nothavea drain.