Kenmore 4559 Use and Care Guide - Page 11

Control Pad Functions Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide. READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. CLOCK SET PAD-- Used to set the time of day. LIGHT PAD-- _ Used to turn oven _ OFF interior light ON or _e COOK TiME PAD-- Used to enter the length of UP and DOWN ARROW PADS-- Used along with the function pads to select oven temperature, cook time, start time (when SAKE PAD--Used to select the bake function. FEATURE iNDiCATOR LIGHTS-- These light to show which feature is in the baking time. \ _ X programming an automatic start time), time of I day, clean time and minute timer. I \ \ I \ I use. / BROIL PAD-- Used to select the variable broil / function. / ./'// _ ,®,,mo C) _eCook__ lIe '•r. °" WARM & HOLD PAD-- Used to set the Warm & Hold SELECT CLEAN PAD-- Used to select the SelfCleaning cycle. A 2, 3 or 4 hour SelfClean time may be selected. TIMER SET/OFF PAD-Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Also, TIMER SET/OFF pad is used to set the Continuous Bake feature. • SCeleleacnt • I Timer Set/Off • I Delay Start 0 OVEN .PREHEAT _ Q DOOR LOCKED _ __ _-...._,,._ _, Lo_o_ _ . DELAY START PAD-- Used to set the desired start time for baking & Self-Clean. May be used with COOK TIME to program a delayed bake cycle. OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" Jight will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self-Clean cycle or when the oven door lockout is activated. The indicator light will glow constantly after the door locks. featu re. _ TOP PAD-- Used tO clear any function except the time of day and minute timer. Press STOP to stop cooking. Also the STOP pad is used to activate oven door lockout setting. iji!"?'_iiii iiiiiii_il;_;!i *Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the pre- heat indicator light turns OFF, your oven has reached the set temperature. For a silent control panel When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation. Press and hold pad. After 5 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return to normal sound operation, press and hold the control beeps once. pad again for 5 seconds until Temperature conversion The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C). To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): 1. Press pad." "appears in the display. 2. Press and hold the A pad until "HI" appears in the display. 3. Press and hold pad until °F or °C appears in the display. 4. Press the A or V pad to change °F to °C or °C to °R 5. Press any control pad to return to normal operating mode. 11