Kenmore 7748 Use and Care Guide - Page 10

Oven Control Functions READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyouroven, become familiar with the various pad functions of the oven as described below. CLOCK SET PAD-- Used to set the time of day. COOK TiME PAD-- Used to enter the length of the baking time. OVEN iNTERIOR LIGHT PAD Used to turn oven interior light ON or OFF. _ \ \ \ \ \., o \® UP and DOWN ARROW PADS-- Used along with the function pads to select oven temperature, cook time, start time (when programming an automatic start time), time of day, clean time and minute timer. BAKE PAD--Used to select the bake function. FEATURE I NDICATOR LIGHTS-- These light to show which feature is in use. BROIL PAD-- Used to select the variable broil function. SELECTSELF-CLEAN PAD-- Used to select the Self-Cleaning -- cycle. A 2, 3 or 4 hour Self-Clean time may be selected. j" TIMER SET/OFF PAD-Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Also, TIMER SET/OFF pad is used to set the Continuous Bake feature. O O II • • /J JJ .J / / J / DELAY START PAD-- Used to set the desired start time for baking & Self-Clean. May be used with COOK TIME to program a delayed bake cycle. O / ........ ,,,,) t OVEN, PREHEAT & DOOR LOCKED LIGHTS* The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the SelfClean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks. WARM & HOLD PAD-Used to set the Warm & Hold feature. STOP/CLEAR PAD-Used to clear any function previously entered except the time of day and minute timer. Press STOP/CLEAR to stop cooking. Also the STOP/CLEAR pad is used to activate oven door lockout setting. *Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheaL This is n0rmal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your 0yen is ready: For a silent control panel When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation. Press and hold _p. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return the sound, press and hold _p again for 7 seconds until the control beeps once. Temperature conversion The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C). To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): 1. Press _,o" "----" appears in the display. 2. Press and hold the A until "HI" appears in the display. 3. Press and hold B,o,until °F or oc appears in the display. 4. Press the A or V to change °F to °C or °C to °F. 5. Press any control pad to return to normal operating mode. 10