Kenmore 7817 Use and Care Guide - Page 13
Shelf
View all Kenmore 7817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
SHELFADJUSTMENT Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food. To adjust sliding shelves: Remove shelf by pulling forward to stop position. Lift front edge up and pull out. Replace the shelf on any pair of rails by reversing this procedure. Sliding Glass Shelf To adjust cantilever shelves: Sliding Wire Shelf DOOR STORAGE Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly selected. Some models have door racks or bins that can accommodate gallon-sized plastic drink containers and economy-sized jars and containers. Some racks are adjustable for maximum storage capacity. The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter. Door Rack ADJUSTABLE DOOR BINS Some models have adjustable door bins that can be moved to suit individual needs. To move door bins 1. Lift bin straight up. 2. Remove bin. 3. Place bin in desired position. 4. Lower bin onto supports until locked in place. O Lift front edge up. O Pull shelf out. Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. SpillProoff Mglass shelves (some models) catch and hold accidental spills. In some models, the SpillProof rMshelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the stopper will allow but it is not removable from the cantilever bracket. Adjustable Door Bin TALL BOTTLE RETAINER (SOME MODELS) The Tall Bottle Retainer keeps tall containers in the bin from falling forward when opening or closing the refrigerator door. To install, hold the retainer at the top, and slide it over the outside wall of the bin, as shown in the diagram. The Tall Bottle Retainer works best with a Bin Snugger. Full Width Cantilever Glass Shelf Cantilever Glass Shelf Fixed and Sliding 13 Tall Bottle Retainer (left) and Bin Snugger (right)