Kenwood CX-DAB1 Operation Manual - Page 4
Determining the antenna installation location, Antenna Installation
View all Kenwood CX-DAB1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Determining the antenna installation location When installing the antenna on the left side Front pillar Earth sheet 150 mm When installing the antenna on the right side Amplifier B Earth sheet 150 mm 70 mm *1 Antenna film A Antenna film A Amplifier B 70 mm *1 • *1 Where the earth sheet of Amplifier B can be pasted on the metal part of the front pillar. Antenna Installation 1 Check the installation location. 2 Wipe the area where antenna film A, amplifier unit B, and earth sheet are pasted with the included cleaner D. The coating on the metal surface need not be removed. ■ Wait until the glass surface is completely dry before pasting. ■ If the glass surface is cold, such as during winter, warm it with defroster or dryer. 3 Remove the separator (tag I) of antenna film A horizontally and paste the antenna on the front glass. 5 After pasting, rub the element in the glass surface in the direction of the arrow shown in the figure to bond it. ■ Remove the separator gently. ■ Do not touch the pasting surface (adhesive side) of the antenna film A. 4 Remove the separator (tag II) of antenna film A vertically and paste the antenna gently while applying pressure. 4 | English 6 Remove the application film (tag III). ■ Do not touch the feeder terminal of the element. Also, do not apply any glass cleaner. Feeder terminal