Kenwood DDX2071 User Manual - Page 57

Removing the unit

Get Kenwood DDX2071 PDF manuals and user guides View all Kenwood DDX2071 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

CONNECTION/INSTALLATION Connecting microphone for Bluetooth (only for DDX771/DDX491HD/ DDX471HD/DDX371/DDX310BT/ DDX3071BT) Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). Removing the unit Removing the trim plate 1 Engage the catch pins on the extraction key (4) and remove the two locks on the lower part. Lower the frame and pull it forward. Removing the unit 1 Remove the trim plate. (See the left column.) 2 Insert the two extraction keys (4), then pull them as illustrated so tat the unit can be removed. 4 4 2 Remove the upper two locations. • Be careful to avoid injury from the catch pins on the extraction key. • The frame can be removed from the top side in 7 the same manner. ENGLISH 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
ENGLISH
57
CONNECTION/INSTALLATION
±
Connecting microphone for Bluetooth
(only for DDX771/DDX491HD/
DDX471HD/DDX371/DDX310BT/
DDX3071BT)
Connect the microphone (
7
) to the MIC terminal.
•
To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
7
Removing the unit
±
Removing the trim plate
1
Engage the catch pins on the extraction
key (
4
) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
4
2
Remove the upper two locations.
•
The frame can be removed from the top side in
the same manner.
±
Removing the unit
1
Remove the trim plate. (See the left
column.)
2
Insert the two extraction keys (
4
), then
pull them as illustrated so tat the unit can
be removed.
4
•
Be careful to avoid injury from the catch pins on
the extraction key.