Kenwood DDX574BH Instruction manual - Page 79
Connection
View all Kenwood DDX574BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals for DDX794/DDX774BH/DDX594/DDX574BH/DDX417BT/DDX394 10 A fuse *1 See page 83. *2 USB terminal (1.0 m): See page 82. See page 83. Connect the antenna cord to the antenna terminal. *1 Only for DDX794/DDX774BH/DDX594/DDX574BH/DDX394. *2 Only for DDX417BT. *3 If no connections are made, do not let the cable come out from the tab. See page 83.*1 FRONT VIEW CAMERA See page 83.*1 See page 84. Purple with white stripe (Reverse sensor wire) Light green (Parking sensor wire) 1 White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Green ª / Green with black stripe · : To rear speaker (left) Purple ª / Purple with black stripe · : To rear speaker (right) *3 Connect to the vehicle's reverse lamp harness when using the optional rear view camera. 3 Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. Light blue with yellow stripe (Steering remote control wire) To the remote adapter (not supplied) which is compatible with your car. Brown (Mute control wire) Blue with white stripe (Power control wire/Antenna control wire) (12 V 350 mA) Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Not used. To the power control terminal when using the optional power amplifier. (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna. To car light control switch. Ignition key switch Fuse box Black (Ground wire) To car chassis Battery ENGLISH 79