Kenwood DNR8025BT Instruction Manual - Page 126
System Setup, User interface
View all Kenwood DNR8025BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
System Setup NOTE • Each operation in this section can be started from the multi function menu. 1 Touch [ ] on any screen. Quick Menu screen appears. 2 Touch [SETUP]. 3 Touch [System]. System screen appears. See the following section for each setting. • Set up the user interface (P.125) • Adjust touch panel (P.126) • Set up security (P.126) • Set up memory (P.127) ÑÑUser interface You can setup user interface parameters. 1 Touch [User Interface] in the list. User Interface screen appears. 2 Set each item as follows. Beep Turns the key touch tone on or off. Default is "ON". Return to the Top page Setting Up Language Select the language used for the control screen and setting items. See Language setup (P.126). Text Scroll Allows scrolling of text display on the source control screen. Select from "Auto"/"Once"/"OFF". Auto (Default): Scrolls the text automatically. Once: Allows you to scroll the text only once automatically when updated. OFF: Does not scroll the text automatically. NAV Key Longer than 1 Second/ APPS Key Longer than 1 Second (DNN9250DAB/ DNR8025BT) You can set the operation performed when the NAV/ APPS key is pressed for 1 second. Select from "V.OFF"/"CAM". V.OFF (Default): Turn the display off. CAM: Switches to the front or rear view camera video display.* Secondary (DNN9250DAB/ DNN6250DAB) Set whether to display the navigation information in the audio screen or vice versa. Default is "ON". Vehicle Information Displays the vehicle information. This function requires a commercial adaptor. Consult your Kenwood dealer for details. DEMO Set the demonstration mode. Default is "ON". * When you set [Front Camera] to OFF, the display will change to the rear view camera and when you set it to "CMOS-3xx"/ "Other", the display will change to the front view camera. See Camera Setup (P.131) 125