Kenwood DNX7140 Owner's Manual (pdf)

Kenwood DNX7140 - Navigation System With DVD player Manual

Get Kenwood DNX7140 - Navigation System With DVD player PDF manuals and user guides
UPC - 019048182494
View all Kenwood DNX7140 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX7140 manual content summary:

  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 1
    GPS NAVIGATION SYSTEM DNX7140 DNX7000EX MONITOR WITH DVD RECEIVER DDX714 DDX7034BT INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 2
    List 28 Link search (Music file) 29 2 DNX7140/DNX7000EX/DDX714/DDX7034BT Initial Setup 90 Radio Listening 30 Source Control Screen 30 Preset Select 31 Auto Memory 31 Manual Memory 32 Radio Text (North American sales area only) 32 Set Station Name 33 Traffic Information (North
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 3
    Navigation Setup 75 [Audio SETUP] DSP Bypass Control 76 Speaker Setup 76 Car Type (DTA) Setup 77 [DVD SETUP] DVD Setup 78 DVD Language Setup 79 DVD Parental Level Setup 79 Disc Setup 80 [USB SETUP] USB Setup 80 [iPod SETUP] iPod Setup 81 [SIRIUS SETUP] SIRIUS Parental Code
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 4
    the next page The instruction continues to the next page. Make sure to flip the page for the rest of the instruction. 4 DNX7140/DNX7000EX/DDX714/DDX7034BT [CRSC] FM memory one after another. "MANU" Switches to the next frequency manually. 2 sec. Continue to touch until the memory number appears.
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 5
    as follows: DNX models DNX7140, DNX7000EX DDX models DDX714, DDX7034BT Function Icon Icons , CD) media. : Function of USB device. : Function of FM reception. SIRIUS: Function of SIRIUS source. XM : Function of XM injuries etc. Special instructions, supplementary explanations, limitations
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 6
    recorder instruction manual.) • If you try to load a 3-inch-disc with its adapter into the unit, the adapter might separate from the disc and damage the unit. Other notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 7
    Double layer) ‡ ‡ Only video format DVD-RAM × CD Music CD ‡ CD-TEXT/8-cm (3 inch) discs supported. CD-ROM ‡ MP3/WMA/AAC/WAV/ CD-R CD-RW ‡ JPEG playback Multisession supported ‡ Packet write not supported RW, mass-storage-class USB device, iPod with KCA-iP301V • Playable disc file format
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 8
    • KNA-DV2100 * Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit. About Satellite Radio tuner This unit supports Satellite Radio tuners which are released by SIRIUS and XM. Optional accessories below are
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 9
    world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. following marks will appear on the screen. For more information, refer to the disc manual. Prohibition Mark Discs with limited period of use Do not leave discs with a limited
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 10
    some conditions. *2 The function of the [AUD] button can be changed to the display off function. See (page 64). DDX models Displays the Top Menu screen. % E Turns the power On. Displays the Source Select screen. @ 1 sec. Turns the power Off. 10 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 11
    While watching the screen other than the above Screen Switching function On/Off. ! DDX models Hands Free control On/Off. 1 sec. While watching the navigation screen or playback screen of a visual source Displays the Easy Control buttons. & G Opens the panel and ejects the disc. Closes the panel. DNX
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 12
    up and use the navigation function, see the Navigation Instruction Manual. ⁄ • For DDX models, an optional navigation system needs to be connected. See (page 8) for connectable navigation units. 12 DNX7140/DNX7000EX/DDX714/DDX7034BT The Source
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 13
    the [38] button on the source control screen, and then disconnect the iPod. See (page 28). 7 USB device To disconnect the USB device, touch the [0] button on the source control screen, and then disconnect the USB device. See (page 22). ⁄ • The playback
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 14
    . DNX/DDX models While watching the Easy Control Screen TEL 1 sec. The Source Control Screen appears. ⁄ • The screen will return to the navigation screen by touching the same part of the Source Control screen. DDX models TOP The Source Control Screen appears. 14 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 15
    Top Menu screen [NAV ] Switches to the navigation screen. [SRC ] Switches to the source control screen of the selected source. [TEL ] Switches to the Hands Free Main screen. [NAV SETUP] Displays Navigation SETUP screen. (Instruction manual of the Navigation part) (DNX models only) [SRC SETUP
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 16
    Reverse search. 2 Displays Menu control screen (DVD-VIDEO, DVD-VR source), Picture control buttons (sources with picture files), or Zoom control buttons (Video CD). Switches TV ⁄ • The information display is cleared automatically after approximately 5 seconds. 16 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 17
    [¢], [7], [£8] Buttons for source control. The buttons are different depending on the source. See the operation pages of each source. While watching the visual source TEL 1 sec. The Easy control screen appears. ⁄ • Easy Control screen is hidden when you touch the central part of the monitor. Basic
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 18
    or pauses. Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen DVD-VIDEO/DVD-VR 1 18 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 19
    Video CD 1 Multi Function [38] Plays or pauses. [7] Stops playing. When touched twice, the disc is played from its beginning when you play it the next time. [0] Ejects a disc. [1], [¡] Fast Forwards or Fast Backwards. [4], [¢] DVD-VIDEO Searches for a chapter. DVD-VR Searches for a chapter.
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 20
    the subtitle language. [Audio] Switches the voice language. [Zoom] Displays the Zoom Control screen. [Exit] Exits the Menu Control 2 screen. 6 Operation on the Zoom Control screen 20 DNX7140/DNX7000EX/DDX714/DDX7034BT [Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 21
    the DVD-VR Disc Menu. 1 Display the playback screen See (page 16). 2 Display the Menu Control screen [Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 22
    various control USB device is connected, touch it again. [1], [¡] CD , AudioFile, MPEG Fast Forwards or Fast Backwards. [4], [¢] Selects a track/ file. [ ], [ ] AudioFile, MPEG , JPEG Selects a folder. [List] Displays the folder list or play list. (page 23) 22 DNX7140/DNX7000EX/DDX714
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 23
    played, initial background is displayed. For information on setting the image display time, see (page 80) or ( Displays the currently playing folder. [CTRL] Returns to the Source Control screen. Play list AudioFile in USB 1 1 Switches to the lower level of the category. [ ]
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 24
    USB Device Select Screen Scrolls to the selected initial. 3 Select a USB device 1 1 Selects a device or partition. [ UP] Returns to the Device Selection screen. [ ] When appears, the text display is scrolled by touching it. [CTRL] Returns to the Source Control screen. 24 DNX7140/DNX7000EX/DDX714
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 25
    (page 26). MPEG Displays the Menu Control Screen (page 26). 4 Displays Source Information Screen. ⁄ • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated. Scrolls to the selected initial. English
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 26
    Screen See (page 16). 2 Display the Picture Control Screen [SUB] Switches the subtitle language. [Audio] Switches the voice language. [Exit] Exits the Menu Control screen. 3 Adjust the video display 26 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 27
    , the information can be displayed automatically when it is updated. • Remove all accessories such as headphone before connecting an iPod. You may not be able to control the iPod if you connect it with accessories attached. • When you connect an iPod to this unit, playback starts from the song you
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 28
    or data. [RDM] Starts or stops Random play.* 28 DNX7140/DNX7000EX/DDX714/DDX7034BT [ARDM] Starts or stops Album Random Play (plays randomly iPod List Lists and searches music/video contained in the iPod. 1 Display the Source Control Screen See (page 28). 2 Display the iPod
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 29
    the specified initial Link search (Music file) Searches for another song of the currently selected artist. 1 Display the Source Control Screen See (page 28). 2 Start Link search Scrolls to the selected initial. 3 Select a song 1 1 Plays the touched song. [ ] When appears
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 30
    remote controller mode switch to "AUD" mode before starting operation, see (page 84). Source Control Screen Switches to the source control screen to use various functions. 1 Display the Source Control Service DNX7140/DNX7000EX/DDX714 manually 31) or (page
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 31
    are displayed. Touch to tune in. [DISP] Switches the list display name to Station name or Program Service Name.*1 [CTRL] Returns to the Source Control screen. ⁄ • *1 North American sales area only. 4 Start Auto Memory Auto Memory terminates when 6 stations are stored or when all stations are
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 32
    to touch until the memory number appears. 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. [ ] When appears, the text display is scrolled by touching it. [5], [∞] Scrolls the text display. 32 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 33
    Set Station Name Assigns a name to a station. 1 Tune in to the station to name See (page 30). 2 Start Name set Traffic Information (North American sales area only) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 34
    . [Search] Searches for the program type. It is displayed when the Program type is selected. [User] Continue to touch more than 2 seconds. The currently receiving station is registered to the selected program type. 4 Search a station of the selected Program Type 34 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 35
    (DDX7034BT only) Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. can be displayed automatically when it is updated. 1 2 3 1, 2 Switches to the TV screen. 3 Displays the Source Control Screen. [BAND] Switches to TV1 or
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 36
    Control Screen Switches to source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control , see (page 37) or (page 37). 36 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 37
    Screen> (page 36). 2 Select a band you wish to store in memory Manual Memory Stores the current receiving channel in memory. 1 Display the Source Control Screen See (page 36). 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 38
    a name to a station. 1 Tune in to the station to name See (page 36). 2 Start Name set 3 Select a station 1 1 Memorized in. [ ] Switches to the TV screen. [CTRL] Returns to the Source Control screen. 3 Enter the name See (page 47) for information on how
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 39
    SIRIUS/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (only with the optional accessory Satellite radio connected. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner,
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 40
    SIRIUS/XM Control (North American sales area only) Channel Search Specifying the desired category and selecting a channel. 1 Display the Source Control Screen See
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 41
    Direct Channel Search Tuning in by entering the desired channel number. 1 Display the Source Control Screen See (page 39). 2 Start Direct Channel Search 3 Enter the channel number 1 1 Enters the channel number. [Cancel] Cancels the direct channel search. [Clear] Clears the
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 42
    ] - [P6] When [P1] to [P6] buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see (page 43) or (page 43). ⁄ • * KTC-HR300 (optional accessory) connected only. 42 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 43
    Screen> (page 42). 2 Select a band you wish to store in memory Manual Memory Stores the current receiving station in memory. 1 Display the Source Control Screen See (page 42). 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 44
    American sales area only) Receive mode Sets the radio broadcasts receive mode. 1 Display the Source Control Screen See (page 42). 2 Display the Receive mode screen Direct Search Tuning in by entering the desired frequency or channel number. KTC-HR300 (optional accessory
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 45
    saved songs will then show up in a playlist called "Purchased" in iTunes the very next time you sync your iPod to your computer. So then you just optional accessory) connected only. Registers a tag ATT 1 sec. The memory usage can be checked 1 Display the Source Control Screen See
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 46
    Control Screen> (page 14). 2 Operation on the Source Control screen [3] Plays. [7] Stops playing. [8] Pauses. [4], [¢] Selects a file. ⁄ • If the Bluetooth Audio player does not support AVRCP profile, buttons are not displayed. Operate from the Audio player. 46 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 47
    off the external device power supply. ⁄ • You must connect a commercially available relay unit in order to use this function. Connect the external device to be controlled to that relay unit. • Refer to (page 67) for information on setting the power on or off specification. English 47
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 48
    . The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . • Playback of the source output at the AV OUTPUT port may not be paused even a call comes in. 48
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 49
    for an NTSC system image on Video, iPod, TV or Rear View Camera. [Color] Color Control Displayed on Video, iPod, TV or Rear View Camera screen only. [Contrast] Contrast Control [Black] Black Level Adjustment [Sharpness] Sharpness control Displayed on Video, iPod, USB or Rear View Camera screen only
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 50
    a Phone Call [ ] Rejecting an Incoming Call During a Call [ ] Switches the voice output between phone and speaker. [DTMF] Outputs dial tone. See (page 54). [ ] Disconnecting a call Adjusting the Voice Volume during a Call 50 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 51
    . See (page 53). [BT SETUP] Displays the Bluetooth SETUP screen. (page 71) [TEL SETUP] Displays the Hands Free Setup screen. number of steps of the control unit is different from that of the cell-phone, the statuses displayed on the control unit may discord from those
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 52
    registered in the Phonebook. 1 Display the Hands-Free Control screen See (page 51). by entering a phone number. 1 Display the Hands-Free Control screen See (page 51). 2 phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone. •
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 53
    Office, Mobile etc.) of Phonebook data, a key word voice must be registered. See (page 56). 1 Display the Hands-Free Control screen See (page 51). Selects the Phone number category. 5 Make a call ⁄ • A message is displayed if the voice is not recognized
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 54
    Hands Free Unit Control Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). Free Control screen See (page 51). 2 Display the Hands Free Setup screen 3 You can send tones during a call 3 Set each item 54 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 55
    -phone phonebook, outgoing calls list, incoming calls list and missed calls list. ( "ON") "ON": Yes. "OFF": No. [SMS Use] Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available. [Key Word] Registers the voice to select phone number category with voice recognition. See
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 56
    Hands Free Unit Control 5 Say the name to register (2nd try) Say within 2 seconds after the Beep. 6 End voice registration ⁄ • A message is . 1 Selects the Phone number category. "REC" turns on for data with voice for voice recognition already registered. 56 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 57
    the step 3. 3 Select the search destination of the number to register SMS (Short Message Service) Uses SMS function. 1 Display the Hands-Free Control screen See (page 51). 2 Display the SMS Select screen 3 Select a function [ ] Registers from Phonebook. [ ] Registers from outgoing
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 58
    Control 4 Select a message to display 1 3 Create a message 1 1 Calls the number in the selected message. [DISP] Displays the selected message. SMS ] Saves the message and returns to the SMS Create Menu screen. Only one draft message number. [SET] Display the Create SMS Message screen. [Send] Sends
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 59
    unit. 1 Display the Source Select Screen SRC 2 Display the Audio Control menu Audio Control You can adjust the front/rear and right/left audio balance. 1 Display the Audio Control screen Touch Audio Control]. (page 59) 2 Set each item 1 In this manual, the above selection is indicated as: Touch
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 60
    Control Equalizer Control You can set up the equalizer. 1 Display the Equalizer screen Touch Equalizer]. (page 59) 2 Set each item Graphic Equalizer Setup You can Manually "Top40"/ "Jazz"/ "Game"/ "iPod"/ "User" ⁄ • "User" can be selected after graphic equalizer DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 61
    are following limitations when zone function is set to "ON". - There is no output from the subwoofer. - (page 60), (page 61), (page 62), (page 76), (page 76), and (page 77) are not available
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 62
    position. 1 Display the Position screen Touch Position]. (page 59) 2 Set the Position Control Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen 2 Select Finely adjust the value set with the Position function. 62 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 63
    [Security] 66 [Angle] 67 [EXT SW] 67 2 Display the Setup Menu Screen [SETUP Memory] 68 [Display] [Background] 69 [Color] 70 [Screen Adjust] 71 [Bluetooth SETUP] 71 [SIRIUS SETUP] 81 [DVD SETUP] 78 [iPod SETUP] 81 [USB SETUP] 80 [TV SETUP] 83 [AV-IN SETUP] 74 [Navigation
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 64
    to the relevant update procedure manual which comes with the software. User Interface You can setup user interface parameters. 1 Display the User Interface screen Touch System] > [User Interface]. (page 63) 2 Set each item [Language] Select the language used for the control screen and setting
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 65
    2 Adjust the Touch panel Follow the instruction on the screen and touch the center of navigation system or the RDS station. ( DNX models: "Navigation", DDX models: "OFF") "OFF"/ "RDS"*1/ "Navigation" When the synchronized mode is set, the clock cannot be adjusted manually. (*1 North American sales
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 66
    security code as that you have entered in Step 4. 2 Register your security code Now, you can use your Receiver. ⁄ • If you have already completed the code registration, [CLR] is displayed. 4 Enter a security Code Input four-digit number. 5 Register your security code 66 DNX7140/DNX7000EX/DDX714
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 67
    SW Setup Setting up power specification of the external device for which the power is controlled from this unit. 1 Display the Angle Setup screen Touch [ ] > [ ( to turn output on/off each time the button on the EXT SW Control screen is touched. [Pulse Set] Sets the Pulse signal output time.
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 68
    Setup Menu Setup Memory Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at the current Audio Setup and AV Interface settings. [Clear] Clears the currently memorized settings. 68 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 69
    files> (page 7) for readable image specifications. • This operation is not possible when USB is selected as the source. Background Change Selects a image for background. 1 Select Background Change screen 2 Select a image for background 1 5 Select the image to load 1 1 Returns to the initial
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 70
    and registers favorite color to the preset buttons ([P1] - [P3]). 2 sec. Adjusted color is registered to the selected Preset button. 4 Complete the color coordination 70 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 71
    Navigation Day/Night display setting. ⁄ • In this Screen Adjust screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the (page 49). 3 Search for a Bluetooth unit 1 1 Displays the registered Bluetooth units. The busy service becomes
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 72
    Bluetooth Unit>. Displays the Bluetooth unit name that can be registered. 3 Confirm whether to register ⁄ • Only models in Bluetooth unit name list can be registered. 4 Go through the procedure of and complete the registration (pairing). 72 DNX7140/DNX7000EX/DDX714
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 73
    the Connect Device List screen 3 Enter PIN code 1 3 Select a registered Bluetooth unit 1 Use the keypad to enter a code number. [Cancel] Cancels registration of PIN code. [Enter] Registers the entered PIN Code. [Clear] Clears the code number. 4 Select the service to use [TEL (HFP)] Connects
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 74
    updated. "Manual": Information is displayed when you touch on the screen. [iPod AV Interface Use] Sets the terminal to which the iPod is connected to. ( "iPod CAM" beforehand. See (page 64). USB. When in USB source, "AV-OUT" cannot be set to DVD. 74 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 75
    "ON", the volume level drops for voice guidance. [Navigation Input] Selects a navigation system connection. ( "RGB") (DDX models only) "RGB": Allows the Kenwood's Navigation System to connect via its interface cable. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT1 port
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 76
    Setup Menu DSP Bypass Control Temporarily bypassing DSP (Digital Signal Processor) System. 1 Display the Audio you are selecting front speakers. If you are using a tweeter together with the 76 DNX7140/DNX7000EX/DDX714/DDX7034BT You can select any of the following speaker types. "Front" OEM, 4
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 77
    Rear Speaker] Sets the location of the rear speaker. "Door", "Rear Deck" "2nd Row", "3rd Row" (Minivan, Minivan (Long)) Car Type Adjust You can manually set the sound output timing of each channel. 1 Display the Car Type Adjust screen 2 Select a speaker you wish to adjust 1 Sets up the car type
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 78
    speaker. +3.4feet 1.6feet 2.5feet 5feet +2.5feet +0feet 78 DNX7140/DNX7000EX/DDX714/DDX7034BT [Menu Language] Selects a disc menu language.*1 (See This is effective only when you are using a Dolby Digital software. The operation is available during the play stop mode. [Angle Mark] Sets an angle
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 79
    the "DVD SETUP" screen. [Enter] Sets the language and returns to the "DVD SETUP" screen. (It appears after you have entered a language code.) 1 Enters a code number. [Cancel] Cancels the current setup and returns to the "DVD SETUP" screen. [Level] Indicates the present parental lock level. [Enter
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 80
    , you need to enter the code number. • The parental lock Manual") "Auto": Information is displayed for 5 seconds when updated. "Manual": USB Setup Performs setup when using USB. 1 Display the USB Setup screen Touch USB SETUP]. (page 63) 2 Set each item 3 Set each item 80 DNX7140/DNX7000EX/DDX714
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 81
    ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. ⁄ • "Wide Screen" cannot be set while the iPod is connected. ⁄ • If you have already completed the code registration, [Change] is displayed. • If you want to clear
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 82
    off, and the display returns to "SIRIUS SETUP" screen. ⁄ • If you have not registered the parental code, the code number you input in this step will be the number to register as SIRIUS Parental Code. In this case, you are requested to input the code once more. 82 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 83
    Channel] Displays all the channels. [On Screen TV] Sets an on-screen display of the TV screen. ( "Auto") (only with the optional accessory TV tuner connected) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. English 83
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 84
    NAVI mode Switch to this mode when controlling the Navigation unit. ⁄ • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". • When controlling a player that is not integrated in the unit, select "AUD" mode. 84 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 85
    OUT IN O ENTER O DISP V.SEL  POSITION AUD • DVD • • Volume control Adjusts the volume. VIEW MAP DIR  O FM+ D O O O AM− 9 PQRS TUV WXYZ  CLEAR 1+ 0 DIRECT # BS AT T V.SEL Switches to the navigation screen. O SRC  MENU ZOOM OUT IN O ENTER O DISP V.SEL  POSITION AUD
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 86
    Remote Controller O O DVD/VCD (DVD mode) Track search and file search Selects the track or file to be played. VIEW MAP DIR  O FM+ D O O AM− /PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR  O O FM+ D ANGLE ZOOM O VOL 86 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 87
    ZOOM Switches the zoom ratio each time you press this key. VIEW MAP DIR  O FM+ D O O O AM−  Y 1 1 2ABC  ANGLE ZOOM 3 DEF O VOL O 2 ZONE Picture Angle Switches the picture angle each time you press this key. ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR  O FM+ D
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 88
    Remote Controller Radio (AUD mode) Band switching Switches to bands received by the unit TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ZOOM Zooms in or out the navigation map. O SRC  MENU ZOOM OUT IN ENTER O DISP V.SEL  POSITION AUD • DVD • TV• 88 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 89
    MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE O MAP DIR Switches between the heading up navigation and north up navigation map displays. O NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 90
    needs to be set to "R-CAM" beforehand. See (page 64). [Color] Sets the screen and button illumination color. (page 70) [EXT SW] Setting up power specification of the external device for which the power is controlled from this unit. (page 67) 90 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 91
    the connection state of the Bluetooth hands-free unit. (Orange ON. Source Display Overview USB "FO-REP" Indicates that slide show function is ON. iPod "MUSIC" Identifies the music file Indicates that Seek mode is set to Manual. "PS" Indicates that the list is being received. SIRIUS/ "SCN" Indicates
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 92
    Romanian ru Russian rw Kinyarwanda sa Sanskrit sd Sindhi sg Sangho sh Serbo-Croatian 92 DNX7140/DNX7000EX/DDX714/DDX7034BT Code Language si Singhalese sk Slovak sl Slovenian sm Samoan sn Shona so Somali sq Albanian sr Serbian ss Siswati st Sesotho su Sundanese
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 93
    Select is Bypass. ☞ (page 76) ▲ The equalizer is set to "iPod". ☞ (page 60) ▲ The unit is set to STANDBY source. What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 94
    be connected to this unit> (page 8). "Update your iPod" : The iPod's software is an older version which the unit can not support. ➡ Confirm that the software for the iPod is the latest version. Refer to (page 8). 94 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 95
    Updating Firmware" : Updating the firmware of SIRIUS tuner. ➡ Operation is invalid until the update is completed. "Updating Channels **%" : Updating the SIRIUS Channel Map. ➡ Operation is invalid until the update is completed. "Subscription Updated" : Updating has finished. "Navigation Error. Please
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 96
    HFP (Hands Free Profile), SPP (Serial Port Profile), HSP (Headset Profile), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video Remote Control Profile), OPP (Object Push Profile), PBAP (Phonebook Access Profile), SYNC (Synchronization Profile) 96 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 97
    section Frequency Range 200 kHz : 87.9 MHz - 107.9 MHz (DNX7140/DNX7000EX/DDX714 only) 50 kHz : 87.5 MHz - 108.0 MHz (DDX7034BT only Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input (DDX714/DDX7034BT only) : 0.7 Vp-p/ 75 Ω Audio section Maximum Power (Front & Rear) : 50
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 98
    A Installation Dimensions (W × H × D) : 182 × 112 × 163 mm 7-3/16 x 4-7/16 x 6-7/16 inch Operational Temperature Range : -10 °C - +60 °C Storage Temperature Range : -20 °C - +85 °C Weight DNX7140/DNX7000EX: 2.5 kg (5.5 lbs) DDX714/DDX7034BT: 2.47 kg (5.4 lbs) 98 DNX7140/DNX7000EX/DDX714/DDX7034BT
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 99
    frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE This equipment
  • Kenwood DNX7140 | Owner's Manual (pdf) - Page 100
    are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. The "AAC" logo is a trademark of Dolby Laboratories. Font for this product is designed by Ricoh. iPod is a trademark of Apple
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GPS NAVIGATION SYSTEM
DNX7140
DNX7000EX
MONITOR WITH DVD RECEIVER
DDX714
DDX7034BT
INSTRUCTION MANUAL
©
B64-4502-00/00 (KW/K2W/RW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX7140/DNX7000EX/DDX714/DDX7034BT
Serial number
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com