Kenwood DNX7140 Owner's Manual (pdf) - Page 90
Initial Setup - how to reset
UPC - 019048182494
View all Kenwood DNX7140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 1 Turns the power On 2 Set each item 3 End initial setup ⁄ • The settings above can be changed in (page 63). [Language] Select the language used for the control screen and setting items. (page 64) [Angle] You can adjust the position of the monitor. (page 67) [iPod AV Interface Use] Sets the terminal to which the iPod is connected to. ( "iPod") [R-CAM Interrupt] Sets a method to switch to the rear view camera video display. ( "OFF") "ON": Switches to the rear camera video display when "Reverse" gear is engaged. "OFF": Switches to the rear camera video display when "Reverse" gear is engaged and then pressing the [AUD] button for more than 1 second. The function of the [AUD] button needs to be set to "R-CAM" beforehand. See (page 64). [Color] Sets the screen and button illumination color. (page 70) [EXT SW] Setting up power specification of the external device for which the power is controlled from this unit. (page 67) 90 DNX7140/DNX7000EX/DDX714/DDX7034BT