Kenwood DRV-410 Instruction Manual - Page 13
Basic Operations
View all Kenwood DRV-410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Basic Operations Inserting and Removing an SD Card Turn off the power of the device and then insert an SD card into the SD card slot until you hear a clicking sound. Be careful with regard to the orientation of the card. Formatting an SD Card Before using an SD card, first format (initialize) it with the device. 1. Insert the SD card into the SD card slot. 2. Press the [MENU/OK] button. MENU appears. To remove the SD card, turn off the power of the device and then press the SD card so that it pops up and remove the SD card by pulling it out. • Be sure to format an SD card with the device. • When an SD card is formatted, all files including protected files are deleted. Turing the Power On/Off Turning on the accessories power (ACC) switch or starting the engine of the vehicle turns on the power of the device and starts continuous recording. When the device is connected using the power code (ÁP.10), turning off the accessories power (ACC) turns off the power of the device and switches to parking recording mode. To Turn the Power On/Off Manually When the accessories power (ACC) is on, the power of the device can be turned on or off manually. • Hold down the [MENU/OK] button for at least 3 seconds while the device is on to turn off the power. • Hold down the [MENU/OK] button for at least 1 second while the device is off to turn on the power. • When the power has been turned off manually, power is consumed because the device is in standby. • There are vehicle models such as some imported vehicles for which the power to the cigarette lighter is not cut off even when the engine is turned off. To protect the battery, remove the cigarette lighter plug when you get out of the vehicle. 3. Use the [J]/[K] buttons to select and then press the [MENU/OK] button. 1 2 1 4. Use the [J]/[K] buttons to select and then press the [MENU/OK] button. 1 2 1 5. Press the [MENU/OK] button to end the procedure. 13