Kenwood KCH-21R User Manual - Page 3
PRECAUTIONS, SUPPLIED ACCESSORIES, When using the KCH-21R, refer to the NOTICES TO THE USER
View all Kenwood KCH-21R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
PRECAUTIONS • Do not disassemble or modify the unit for any reason. • Do not expose the unit to long periods of direct sunlight, nor place it close to heating appliances. • Do not place the unit in excessively dusty and/or humid areas, nor on unstable surfaces. • If you detect an abnormal odor or smoke coming from the unit, disconnect the power from the unit immediately. Contact your KENWOOD service center or dealer. • Do not attempt to configure the transceiver while driving; it is too dangerous. • Do not use options not specified by KENWOOD. • Always turn off the power before installing optional accessories. • Do not place the microphone cable around your neck while machinery that may catch the cable. • Turn OFF your Transceiver while taking on fuel or while in gasoline service stations. • If the die-cast chassis or other transceiver part is damaged, do not touch the damaged parts. • Keep the volume as low as possible to protect your hearing. • The microphone and microphone cable should be mounted in a place where they will not interfere with the safe operation of the vehicle. • When operating the transceiver in areas where the air is dry, it is easy to build up an electric charge (static electricity). When using an earphone accessory in such conditions, it is possible for the transceiver to send an electric shock through the earphone and to your ear. We recommend you use only a speaker/microphone in these conditions, to avoid electric shocks. • Condensation may occur inside the equipment when the unit is quickly moved from a cold location to a warm location. If this happens, turn OFF the equipment and wait for a while. • When using the KCH-21R, refer to the "NOTICES TO THE USER" and "PRECAUTIONS" in the USER GUIDE of Mobile Transceiver of NX-5000 series. If the warnings ( ) are not observed, there may be the possibility to have any malfunction. In this case, press and hold the Power Switch for 5 seconds or more. If the malfunction persists, ask your dealer. SUPPLIED ACCESSORIES • Hanger (with 4 x 16 mm self-tapping screws 1 set 2