Kenwood KCH-21R User Manual 1 - Page 1

Function Indicator Indicator Description Displays the signal strength. The channel is using high transmit power. The channel is using medium transmit power. The channel is using low transmit power. In Digital mode (Digital Channel) In Analog mode (Analog Channel) In Digital mode (Mixed Channel) In Analog mode (Mixed Channel) The Bluetooth function is activated. Blinks in the process of turning on Bluetooth. Connected to Bluetooth device. The GPS position is determined. Blinks when the GPS is unable to determine the position. Non-priority Scan or Voting/Site Roaming is in progress. Blinks when the scan is paused. (green icon) Priority Scan is in progress. Blinks when the scan is paused. (red icon) Indicates Priority channel 1 or Priority Monitor ID 1. Indicates Priority channel 2 or Priority Monitor ID 2. Indicates Priority Monitor ID 3. Indicates Priority Monitor ID 4. QQuuicickkRReeferenncceeCCaarrdd Indicator Description The current channel is added to the scanning sequence. The current Zone is added to the MultiZone scanning sequence. The Scrambler function is activated. The Encryption function is activated. Blinks when receiving an encrypted carrier. The Encryption (AES) function is activated. Blinks when receiving an encrypted carrier. The Encryption (DES) function is activated. Blinks when receiving an encrypted carrier. The Talk Around function is activated. The Monitor or Squelch Off is activated. The External Speaker is activated. The External Speaker (Internal + External) is activated. The Noise Reduction function is activated. Blinks when Noise Reduction is functioning. Blinks when an incoming call matches your Optional Signaling. A message is stored in memory. Blinks when a new message has arrived. The microSD memory card is recognized. The microSD memory card is not recognized. The VOX function is activated. Indicator Description The Site Lock function is activated. The System Lock function is activated. The Broadcast Call function is activated. The Surveillance function is activated. The selected group is programmed as telephone IDs. Blinks during Auto Telephone search. The Tactical Zone is activated. The Horn Alert function is activated. The Public Address function is activated. The Intercom function is activated. AUX A is activated. AUX B is activated. AUX C is activated. The Lone Worker function is activated. The OVCM function is activated. The Compander function is activated. The Operator Selectable Tone function is activated. Blinks during Auto Recording. The Key Lock function is activated. Programmable Functions Key Power switch PTT (Push To Talk) switch a d n e bh j k cf l g m i © 2017 No. Programmed Function Name a b c d e f g h i j k l m n (Enter the programmed function names for each key.) Comment B5A-1912-00