Kenwood KDC-248U Instruction Manual - Page 12
Listening to the other external, components - faceplate
UPC - 019048191786
View all Kenwood KDC-248U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Listening to the other external components Preparation : Make sure [ON1] or [ON2] is selected for [BUILTIN AUX]. (page 6) 1 Press SRC to select "AUX." 2 Turn on the external component and start playing. 3 Turn the volume knob to adjust the volume. Portable audio device (optional accessory) Auxiliary input jack 3.5 mm (3/16") stereo mini plug (optional accessory) Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. Handling discs Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and move outward. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove the rims from the center hole and disc edge before inserting a disc. 12