Kenwood KDC-255U Instruction Manual - Page 9
SiriusXM™ - receiver
View all Kenwood KDC-255U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected, a pass code input screen appears. Enter the pass code to receive the channel. • To store a channel of the current band: Press and hold one of the number buttons (1 to 6). • To select a stored channel of the current band: Press one of the number buttons (1 to 6) Direct Access Tuning (using RC-406) (except for KMR-355U ) 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a channel number, then press 4 / ¢ (+) to start searching. • To cancel, press or DIRECT. Replay Press G. Replay starts from the live position (and " " lights up for KDC-X397 ). During Replay... • To pause or resume playback, press 6 38. • To skip the current song backward/forward, press 4 / ¢. • To rewind/fast-forward, press and hold 4 / ¢. • To exit from Replay and go to live, press G. Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to make a selection (see table on the right), then press the knob. 4 Press and hold to exit. SiriusXM™ SEEK MODE Default: XX Selects the tuning method for the 4 / ¢ buttons. CHANNEL: Manually search for a channel. ; PRESET: Search for a preset channel of the selected band. CHANNEL LOCK/ CH LOCK To unlock settings: 1 Turn the volume knob to select a number. 2 Press 4 / ¢ to move to the entry position. 3 Repeat steps 1 and 2 to enter the current pass code. (Initial pass code is 0000.) 4 Press the volume knob to confirm. CODE SET 1 Turn the volume knob to select a number. 2 Press 4 / ¢ to move to the entry position. 3 Repeat steps 1 and 2 to enter a new 4-digit pass code. 4 Press the volume knob to confirm. 5 Repeat steps 1 to 4 to reconfirm the pass code. • Make a note of the new pass code to enter channel lock settings from next time. CHANNEL EDIT/CH EDIT * 1 Turn the volume knob to select a category, then press the knob. 2 Turn the volume knob to select a channel you want to lock, then press the knob. "L" appears in front of the channel number. 3 Press G to exit. CHANNEL CLEAR/CH CLEAR * YES: Clears all the locked channels. ; NO: Cancels. MATURE CH ON: Turns on the Sirius XM-defined lock setting (mature channel). ; OFF: Turns off. • If [ON] is selected, your setting (CHANNEL EDIT/ CH EDIT) is temporary ignored. SIGNAL LEVEL/ SIGNAL LVL NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received signal. BUFFER USAGE/ BUF USAGE 0% - 100% (0): Shows the memory usage for Replay buffer. * Displayed only when [MATURE CH] is set to [OFF]. EN_KDC-X397[KWK0]f.indd 9 ENGLISH | 9 8/22/12 10:06:05 AM