Kenwood KDC-348U Instruction Manual

Kenwood KDC-348U Manual

Get Kenwood KDC-348U PDF manuals and user guides
UPC - 019048193032
View all Kenwood KDC-348U manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KDC-348U manual content summary:

  • Kenwood KDC-348U | Instruction Manual - Page 1
    KDC-BT648U KDC-X695 KDC-X395 KDC-348U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will
  • Kenwood KDC-348U | Instruction Manual - Page 2
    a phone call Listening to the Radio 8 Adjust [SETTINGS] mode settings Listening to the other external components 9 Listening to a Disc/ USB device/ iPod 10 Start playing a disc Start playing a USB device or iPod Removing the USB device or iPod Start playing the disc changer Selecting
  • Kenwood KDC-348U | Instruction Manual - Page 3
    this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment. ■ If you experience problems during installation, consult your Kenwood dealer. ■ When you purchase external components
  • Kenwood KDC-348U | Instruction Manual - Page 4
    of the unit and faceplate with your fingers. How to reset your unit If this unit fails to operate properly, press the reset 1 button. 2 The unit returns to factory settings when the reset button is pressed. 3 Reset button If the effectiveness of the remote controller decreases, replace the
  • Kenwood KDC-348U | Instruction Manual - Page 5
    you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables "AUX" in source selection. CD READ 1*: Automatically distinguishes between audio file disc and music CD
  • Kenwood KDC-348U | Instruction Manual - Page 6
    mode is selected now. BT: Bluetooth cell-phone connection status. The illustration and button names used for explanation in this manual are of KDC-BT648U/ KDC-X695 (unless mentioned otherwise). Refer to the table below for the difference: KDC-BT648U/ KDC-X695 KDC-X395/ KDC-348U Display window USB
  • Kenwood KDC-348U | Instruction Manual - Page 7
    When you press or hold the following button(s)... Main unit Remote controller General operation - ■ Turns on. ■ Turns off if pressed and held. SRC Selects the available sources (TUNER, USB or iPod, CD, AUX, SRC STANDBY), if the power is turned on. • If the source is ready, playback also
  • Kenwood KDC-348U | Instruction Manual - Page 8
    Muting upon the reception of a phone call (KDC-X395/ KDC-348U only) To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (See "Installation Manual" on a separate volume.) When a call comes in, "CALL" appears. ■ The audio system pauses. ■ To continue
  • Kenwood KDC-348U | Instruction Manual - Page 9
    type categorized under [SPEECH] or [MUSIC] if selected. [SPEECH] : Roman typeface item. ; [MUSIC] : Italic typeface item. ■ The Radio Data System feature won't work where the service is not supported to select "AUX". 2 Turn on the external component and start playing. 3 Turn the volume knob to
  • Kenwood KDC-348U | Instruction Manual - Page 10
    iPod (commercially available) KCA-iP102 (optional accessory) Removing the USB device or iPod 1 Press SRC to select a source other than "USB" or "iPod". 2 Remove the USB device or iPod. Start playing the disc changer 1 Press SRC to turn on the power. 2 Press SRC to select "CD CHANGER". 10 English
  • Kenwood KDC-348U | Instruction Manual - Page 11
    13) This operation is effective only for the iPod or Kenwood Music Editor media. ■ To return to the root folder (audio file), top menu (iPod) or first track (audio CD), press BAND. ■ To return to the previous folder, press . ■ To cancel the Music Search mode, press and hold . ■ < or > on the display
  • Kenwood KDC-348U | Instruction Manual - Page 12
    be skipped during search. Direct Music Search using the remote controller (RC-405) • Not available if Random Play, Scan Play, KENWOOD Music Editor media, iPod playback is selected. 1 Press DIRECT to enter Direct Music Search mode. "- - -" appears. 2 Press the number buttons to enter the track number
  • Kenwood KDC-348U | Instruction Manual - Page 13
    software, and your disc recorder instruction manual.) ■ 3-inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. About Audio file ■ Playable Audio file : MP3 (.mp3), WMA (.wma) : AAC-LC (.m4a) KDC-BT648U/ KDC-X695 only ■ Playable disc media: CD-R/RW/ROM ■ Playable disc
  • Kenwood KDC-348U | Instruction Manual - Page 14
    unit supports the PC application "KENWOOD Music Editor Light ver1.1" or later. ■ When you use the audio file with database information added by the "KENWOOD Music Editor Light ver1.1", you can search a file by title, album or artist name using Music Search (page 11). ■ In the Instruction manual, the
  • Kenwood KDC-348U | Instruction Manual - Page 15
    mode. ■ For more details, see (page 18). ■ If an error code is displayed during paring, see (page 34). KDC-X395 / KDC-348U The following 3 steps procedure is necessary. Step 1. Pairing (Registering from Bluetooth devices) 1 Press SRC to turn on the power
  • Kenwood KDC-348U | Instruction Manual - Page 16
    . ■ When registering from this unit. Refer to (page 19). Making a Call 1 KDC-BT648U / KDC-X695 Press to enter Bluetooth mode. KDC-X395 / KDC-348U Press and hold the volume knob to enter Bluetooth mode. 2 Turn the volume knob to select a dialing method, then
  • Kenwood KDC-348U | Instruction Manual - Page 17
    . Receiving a Call Answering a Phone Call KDC-BT648U / KDC-X695 Press . KDC-X395 / KDC-348U Press the volume knob. Rejecting an Incoming Call Press SRC. During a Call Disconnecting a Call KDC-BT648U / KDC-X695 Press . KDC-X395 / KDC-348U Press SRC. Switching to the Private Mode Press number button
  • Kenwood KDC-348U | Instruction Manual - Page 18
    . During a call: SRC : End the call. Bluetooth Setup Preparation : KDC-X395/ KDC-348U: Only with the optional accessory KCA-BT300 or KCA-BT200 connected. Easy Pairing function • KDC-BT648U/ KDC-X695 only. 1 Press and hold to enter easy pairing mode "PAIRING" is displayed. ■ Any of the following
  • Kenwood KDC-348U | Instruction Manual - Page 19
    to [PIN CODE EDIT] under (page 22). 4 By operating the Bluetooth device, start hands-free connection. Registering from this unit 1 KDC-BT648U / KDC-X695 Press to enter Bluetooth mode. KDC-X395 / KDC-348U Press and hold the volume knob to enter Bluetooth mode. 2 Turn the volume
  • Kenwood KDC-348U | Instruction Manual - Page 20
    If the device name is not in the list, select "OTHER PHONE". Selecting the Bluetooth Device 1 KDC-BT648U / KDC-X695 Press to enter Bluetooth mode. KDC-X395 / KDC-348U Press and hold the volume knob to enter 20 English Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter
  • Kenwood KDC-348U | Instruction Manual - Page 21
    voice tags. ■ Audio sound is not output during voice tag registration. Registering Phone Book Name Type 1 KDC-BT648U / KDC-X695 Press to enter Bluetooth mode. KDC-X395 / KDC-348U Press and hold the volume knob to enter Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter
  • Kenwood KDC-348U | Instruction Manual - Page 22
    whether the built-in or external microphone is to be used when the receiver incorporates a microphone. IN *: Use the built-in microphone. ; EXT: Use the external microphone. ■ [MIC GAIN], [NR LEVEL], [EC LEVEL] is selectable only for KDC-BT648U, KDC-X695 and KDC-X395/KDC-348U with KCA-BT300
  • Kenwood KDC-348U | Instruction Manual - Page 23
    Service) Preparation : KDC-X395/ KDC-348U: Only with the optional accessory KCA-BT300 or KCA-BT200 connected. KDC-X395/ KDC-348U Press and hold to enter Bluetooth mode. KDC-BT648U/ KDC-X695 Press to enter Bluetooth mode. Downloading the SMS 1 KDC-BT648U / KDC-X695 Press to enter Bluetooth mode
  • Kenwood KDC-348U | Instruction Manual - Page 24
    with Bluetooth cannot be accessory KTC-HR300 tuner connected. 1 Press BAND to select a band. 2 Press DIRECT to enter Direct Access Tuning mode. "- - - -" appears. 3 Press DIRECT to select tuning item. Frequency. - "HD -" : Channel. - Cancelling Direct Access Tuning. 4 Press the number buttons
  • Kenwood KDC-348U | Instruction Manual - Page 25
    . ■ If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. Using the remote controller (RC-405) #FM+ / *AM- : Selects band. 4 / +¢ : Selects station. 1 - 6 : Selects preset station. iTunes Tagging • Only with optional accessory KTC-HR300 tuner
  • Kenwood KDC-348U | Instruction Manual - Page 26
    make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. ■ If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "ACQUIRING SIGNAL"/ "NO SIGNAL" appears. Using the remote controller (RC-405) #FM
  • Kenwood KDC-348U | Instruction Manual - Page 27
    ], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold to finish the procedure. Item Selectable setting (Preset: *) SEEK MODE Selects the tuning mode for 4 / ¢ buttons. CHANNEL *: Normal manual seeking control. ; PRESET
  • Kenwood KDC-348U | Instruction Manual - Page 28
    bass boost level. ; OFF: Cancels. SYSTEM Q NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.) BASS ADJUST KDC-X695/ KDC-X395 only: BASS CTR FRQ 40/ 50/ 60/ 70
  • Kenwood KDC-348U | Instruction Manual - Page 29
    compression. ; OFF: Cancels. (Selectable only when playback an AAC/ MP3/ WMA disc or a USB device, except iPod.) VOLUME OFFSET -8 - 0 * - +8 (for AUX) ; -8 increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.) ■ Select a
  • Kenwood KDC-348U | Instruction Manual - Page 30
    Installation/connection Part list: A Faceplate 1) B Escutcheon 1) C Mounting sleeve 1) D Wiring harness 1) E Removal tool 2) F Flat head screw (for Nissan cars 4) G Round head screw (for Toyota cars 4) H Microphone (3 m) (KDC-X695 only 1) Basic procedure 1 Remove the key from the ignition
  • Kenwood KDC-348U | Instruction Manual - Page 31
    ■ Mounting and wiring this product requires skills and experience. For safety's sake, leave this work to professionals. If you experience problems during installation, consult your Kenwood dealer. ■ Reception may drop if there are metal objects near the Bluetooth antenna. Bluetooth antenna unit For
  • Kenwood KDC-348U | Instruction Manual - Page 32
    Wiring connection USB connector AUX input (Stereo) Use the mini-plug (3.5 mm; 1/8") cable which is stereo type and does not have any resistance. FM/AM antenna input (JASO) Antenna Cord Fuse (10A) Wiring harness D Rear output R L Front output Sub Woofer output Microphone H (KDC-X695 only)
  • Kenwood KDC-348U | Instruction Manual - Page 33
    cars N: Nissan cars Removing the unit 1 Detach the faceplate A. 2 Engage the catch pin on the removal tools E into the holes on both sides of the escutcheon B, then pull it out. 3 Insert the removal tools E deeply into the slots on each side, then follow the arrows instructions as shown on the
  • Kenwood KDC-348U | Instruction Manual - Page 34
    loading slot. The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another disc instead. The unit is malfunctioning for some reason. Press the reset button on the unit. If the "ERROR 77"/ "ERROR 99" code does not disappear, consult your nearest service center. 34 English
  • Kenwood KDC-348U | Instruction Manual - Page 35
    MUSIC" or "ERROR 15" appears. The connected USB device contains no playable audio file. / Media was played that does not have data recorded that the unit can play. "NA DEVICE" appears. Connect a supported USB device, and check the connections. "USB ERROR" appears. Remove the USB device, turn
  • Kenwood KDC-348U | Instruction Manual - Page 36
    appears, press the reset button on the control unit. "HF ERROR 68" appears. The unit cannot communicate with the cell-phone. Turn off the power and on again. If this message still appears, press the reset button on the control unit. "UNKNOWN" appears. The Bluetooth device cannot be detected
  • Kenwood KDC-348U | Instruction Manual - Page 37
    Bluetooth section (KDC-BT648U/ KDC-X695 only) Technology: Bluetooth Ver. 2.0 Certified Frequency: 2.402 - 2.480 GHz Output Power: +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Maximum Communication range: Line of sight approx. 10m (32.8 ft) Profile: HFP (Hands Free Profile), SPP (Serial Port Profile
  • Kenwood KDC-348U | Instruction Manual - Page 38
    to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply
  • Kenwood KDC-348U | Instruction Manual - Page 39
  • Kenwood KDC-348U | Instruction Manual - Page 40
    Kenwood Service Center ~ Improper maintenance or repair, including the installation a! parts or accessories that do not conform to the quality and specifications of the original parts. • Misuse,abuse, neglect. unauthorized producf modification or failure to follow instructions contained in the Owner
  • Kenwood KDC-348U | Instruction Manual - Page 41
    , abuse, misuse, lightning, power surges. neglect or lack of periodic maintenance, unauthorized modification or failure to follow instructions in the owner's manual. (t) Delects or damage as a result of repairs performed by a person or party not authorized by KENWOOD. (g) Defecls resulling lrom the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
KDC-BT648U
KDC-X695
KDC-X395
KDC-348U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
B64-4798-10/01 (KW/K0)
©
2010 Kenwood Corporation All Rights Reserved.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from
your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the
space provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for
information or service on the product.
Model KDC-BT648U/ KDC-X695/ KDC-X395/ KDC-348U
Serial number
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com